Re: E-body washer hose routing ??
[Re: 70challrtse]
#59504
05/19/08 07:06 PM
05/19/08 07:06 PM
|
Joined: Feb 2003
Posts: 2,852 Dallas, TX
70challrtse
super gas
|
super gas
Joined: Feb 2003
Posts: 2,852
Dallas, TX
|
One more showing it a little closer to the bottle. Ok,.that one didn't turn out so I took this one.
Last edited by 70challrtse; 05/19/08 07:16 PM.
|
|
|
Re: E-body washer hose routing ??
[Re: gtx6970]
#59507
05/19/08 07:36 PM
05/19/08 07:36 PM
|
Joined: Jul 2005
Posts: 1,169 Richmond, VA
rayztoy
super stock
|
super stock
Joined: Jul 2005
Posts: 1,169
Richmond, VA
|
Quote:
I had someone else tell me the drivers side end should route thru the master cylinder/power brake booster wire clip on that end then up to the hood tee
Hi Bill, I heard that also. Do you know where can I get the "master cylinder/power brake booster wire clip"? Thanks.
|
|
|
Re: E-body washer hose routing ??
[Re: rayztoy]
#59513
05/19/08 08:36 PM
05/19/08 08:36 PM
|
Joined: Feb 2003
Posts: 2,852 Dallas, TX
70challrtse
super gas
|
super gas
Joined: Feb 2003
Posts: 2,852
Dallas, TX
|
Quote:
I guess there is always some variation. Mine is run like yours Ron, and goes through a hole in the cowl.
Yep, like most things Mopar, there are very few absolutes, but I don't think it runs through hole in the cowl.
|
|
|
Re: E-body washer hose routing ??
[Re: rayztoy]
#59515
05/19/08 08:46 PM
05/19/08 08:46 PM
|
Joined: Feb 2003
Posts: 2,852 Dallas, TX
70challrtse
super gas
|
super gas
Joined: Feb 2003
Posts: 2,852
Dallas, TX
|
Quote:
There's a lip where the top of the cowl meets and overhangs on the firewall about a 1/2 inch and there is a hole right above my wiper motor. It was suggested that the hose runs through it.
That's seems logical, but I don't think so.
|
|
|
Re: E-body washer hose routing ??
[Re: gygeneral]
#59517
05/19/08 11:21 PM
05/19/08 11:21 PM
|
Joined: Jan 2003
Posts: 6,252 Zzyzx Road
beepbeep
moparts member
|
moparts member
Joined: Jan 2003
Posts: 6,252
Zzyzx Road
|
I guess that is as good a reason as any to change history.
Amazing how an unchallenged lie can become the absolute truth.
|
|
|
Re: E-body washer hose routing ??
[Re: rayztoy]
#59519
05/20/08 07:27 AM
05/20/08 07:27 AM
|
Joined: Jul 2005
Posts: 1,169 Richmond, VA
rayztoy
super stock
|
super stock
Joined: Jul 2005
Posts: 1,169
Richmond, VA
|
Quote:
Do you know where can I get the "master cylinder/power brake booster wire clip"? Thanks.
|
|
|
Re: E-body washer hose routing ??
[Re: BADBEE]
#59522
05/20/08 10:04 AM
05/20/08 10:04 AM
|
Joined: Feb 2003
Posts: 2,852 Dallas, TX
70challrtse
super gas
|
super gas
Joined: Feb 2003
Posts: 2,852
Dallas, TX
|
Quote:
How about up under the hood? Any pics of that set up?
I'll check to see if I have any pics, if not I will take some.
|
|
|
Re: E-body washer hose routing ??
[Re: BADBEE]
#59524
05/20/08 06:34 PM
05/20/08 06:34 PM
|
Joined: Feb 2003
Posts: 2,852 Dallas, TX
70challrtse
super gas
|
super gas
Joined: Feb 2003
Posts: 2,852
Dallas, TX
|
Quote:
How about up under the hood? Any pics of that set up?
Here you go, but again not saying my car is 100% correct.
|
|
|
Re: E-body washer hose routing ??
[Re: beepbeep]
#59533
05/22/08 11:29 AM
05/22/08 11:29 AM
|
Joined: Feb 2003
Posts: 2,852 Dallas, TX
70challrtse
super gas
|
super gas
Joined: Feb 2003
Posts: 2,852
Dallas, TX
|
Quote:
Quote:
Here is a scan of the diagram.
Steve, any idea what year(s) that is from? Looking at the washer bottle it is not 70/71.
Yep, that was my thought as well.
|
|
|
Re: E-body washer hose routing ??
[Re: 70challrtse]
#59534
05/22/08 11:34 AM
05/22/08 11:34 AM
|
Joined: Jan 2003
Posts: 6,252 Zzyzx Road
beepbeep
moparts member
|
moparts member
Joined: Jan 2003
Posts: 6,252
Zzyzx Road
|
Per the FAD this hose should be under the squirter.
Amazing how an unchallenged lie can become the absolute truth.
|
|
|
Re: E-body washer hose routing ??
[Re: beepbeep]
#59535
05/22/08 11:46 AM
05/22/08 11:46 AM
|
Joined: Feb 2003
Posts: 2,852 Dallas, TX
70challrtse
super gas
|
super gas
Joined: Feb 2003
Posts: 2,852
Dallas, TX
|
Quote:
Per the FAD this hose should be under the squirter.
Thanks, but should it be tucked inside the hood like it is on the driver's side in my photo?
|
|
|
Re: E-body washer hose routing ??
[Re: beepbeep]
#59538
05/22/08 12:46 PM
05/22/08 12:46 PM
|
Joined: Feb 2003
Posts: 2,852 Dallas, TX
70challrtse
super gas
|
super gas
Joined: Feb 2003
Posts: 2,852
Dallas, TX
|
Quote:
Quote:
Quote:
Per the FAD this hose should be under the squirter.
Thanks, but should it be tucked inside the hood like it is on the driver's side in my photo?
Copy the pic, I am going to remove it.
Thanks Beep, but I can't tell from the sketch if mine is correct - tucked inside the inner hood on the driver's side.
|
|
|
Re: E-body washer hose routing ??
[Re: 70challrtse]
#59539
05/22/08 12:48 PM
05/22/08 12:48 PM
|
Joined: Jan 2003
Posts: 6,252 Zzyzx Road
beepbeep
moparts member
|
moparts member
Joined: Jan 2003
Posts: 6,252
Zzyzx Road
|
The hose should be behind the squirter not on top of it.
Amazing how an unchallenged lie can become the absolute truth.
|
|
|
Re: E-body washer hose routing ??
[Re: beepbeep]
#59540
05/22/08 12:52 PM
05/22/08 12:52 PM
|
Joined: Feb 2003
Posts: 2,852 Dallas, TX
70challrtse
super gas
|
super gas
Joined: Feb 2003
Posts: 2,852
Dallas, TX
|
Quote:
The hose should be behind the squirter not on top of it.
Yes Sir, I understand, but please look at my pic. Do you see where the hose is tucked in the inner hood, that looks wierd, but is it correct? Thanks.
|
|
|
Re: E-body washer hose routing ??
[Re: 70challrtse]
#59541
05/22/08 01:01 PM
05/22/08 01:01 PM
|
Joined: Jan 2003
Posts: 6,252 Zzyzx Road
beepbeep
moparts member
|
moparts member
Joined: Jan 2003
Posts: 6,252
Zzyzx Road
|
The FAD is showing it going behind the bracing like you have it. You can also push the hose up on the passenger side, but I doubt it will stay.
Amazing how an unchallenged lie can become the absolute truth.
|
|
|
Re: E-body washer hose routing ??
[Re: 70challrtse]
#59543
05/22/08 01:11 PM
05/22/08 01:11 PM
|
Joined: Jan 2003
Posts: 6,252 Zzyzx Road
beepbeep
moparts member
|
moparts member
Joined: Jan 2003
Posts: 6,252
Zzyzx Road
|
Hope it answers you question. The FAD does not specify the hose length, it only states to leave enough slack for the hood to open on the hose going up to the hood.
Amazing how an unchallenged lie can become the absolute truth.
|
|
|
Re: E-body washer hose routing ??
[Re: beepbeep]
#59545
05/22/08 04:44 PM
05/22/08 04:44 PM
|
Joined: May 2004
Posts: 136 Oshawa, Ontario, Canada
MoparSam
member
|
member
Joined: May 2004
Posts: 136
Oshawa, Ontario, Canada
|
Steve, any idea what year(s) that is from? Looking at the washer bottle it is not 70/71.
Beepbeep
Here is the full scan from Mopar Action including the article. The guy asks about the washer system for a 70 challenger. I didn't even notice the washer bottle thing.
Steve
Last edited by MoparSam; 05/22/08 04:45 PM.
|
|
|
|
|