Moparts
E-body washer hose routing ??
Posted By: BADBEE
E-body washer hose routing ?? - 05/19/08 03:33 PM
Does anyone have a diagram or can they shoot me a
few pics of how the hoses route along the apron
and up under the hood for a car with an electric
pump unit?
Thanks
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/19/08 05:39 PM
I'll try to post a pic or two when I get home.
Posted By: BADBEE
Re: E-body washer hose routing ?? - 05/19/08 07:02 PM
Thanks.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/19/08 11:00 PM
Here's mine. I'm not saying for certain it is absolutely correct, but might stimulate some helpful discussion.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/19/08 11:06 PM
One more showing it a little closer to the bottle. Ok,.that one didn't turn out so I took this one.
Posted By: gtx6970
Re: E-body washer hose routing ?? - 05/19/08 11:25 PM
I had someone else tell me the drivers side end should route thru the master cylinder/power brake booster wire clip on that end then up to the hood tee
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/19/08 11:32 PM
Bill, if that's true I need a lot more hose. Do you sell it? By the way, thank you VERY much. I appreciate you.
Posted By: rayztoy
Re: E-body washer hose routing ?? - 05/19/08 11:36 PM
Quote:
I had someone else tell me the drivers side end should route thru the master cylinder/power brake booster wire clip on that end then up to the hood tee
Hi Bill,
I heard that also. Do you know where can I get the "master cylinder/power brake booster wire clip"? Thanks. 
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/20/08 12:11 AM
I'd like to see a picture if anyone has one.
Posted By: beepbeep
Re: E-body washer hose routing ?? - 05/20/08 12:21 AM
Quote:
I had someone else tell me the drivers side end should route thru the master cylinder/power brake booster wire clip on that end then up to the hood tee
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/20/08 12:24 AM
I just looked at an atricle called "Anatomy Of a Solid Gold "Cuda from Mopar Action; it was on a Gibson restored 6 pack Cuda and the washer hose was routed like mine. Again, I'm not saying it's right, but it is food for thought.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/20/08 12:28 AM
Quote:
Quote:
I had someone else tell me the drivers side end should route thru the master cylinder/power brake booster wire clip on that end then up to the hood tee
I was typing while you were posting. That's a very interseting pic there Beep. Thanks for your imput. What would the rational be for draping it across the back of the engine.
Posted By: rayztoy
Re: E-body washer hose routing ?? - 05/20/08 12:32 AM
I guess there is always some variation. Mine is run like yours Ron, and goes through a hole in the cowl.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/20/08 12:36 AM
Quote:
I guess there is always some variation. Mine is run like yours Ron, and goes through a hole in the cowl.
Yep, like most things Mopar, there are very few absolutes, but I don't think it runs through hole in the cowl.
Posted By: rayztoy
Re: E-body washer hose routing ?? - 05/20/08 12:44 AM
There's a lip where the top of the cowl meets and overhangs on the firewall about a 1/2 inch and there is a hole right above my wiper motor. It was suggested that the hose runs through it.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/20/08 12:46 AM
Quote:
There's a lip where the top of the cowl meets and overhangs on the firewall about a 1/2 inch and there is a hole right above my wiper motor. It was suggested that the hose runs through it.
That's seems logical, but I don't think so.
Posted By: gygeneral
Re: E-body washer hose routing ?? - 05/20/08 02:17 AM
There was an engineering drawing on BW's site showing the routing through the wire holder on the master cylinder. When I did mine, the hose lenght in the kit was not long enough to be able to do this.
Posted By: beepbeep
Re: E-body washer hose routing ?? - 05/20/08 03:21 AM
I guess that is as good a reason as any to change history.
Posted By: Alaskan_TA
Re: E-body washer hose routing ?? - 05/20/08 03:43 AM
beepbeep showed the routing at the booster for the variable speed wiper motor (with power washer)above.
If any of the car owners with the two speed motor (manual washer MOST of the time) needs it, here is a photo for you;
Posted By: rayztoy
Re: E-body washer hose routing ?? - 05/20/08 11:27 AM
Quote:
Do you know where can I get the "master cylinder/power brake booster wire clip"? Thanks.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/20/08 11:45 AM
Ray, check with Badalson, Tony or Tom at RT Speciaties, if none of those guys can help you get back to me and I'll get you one of mine. If you need a # for thoses guys let me know.
Posted By: BADBEE
Re: E-body washer hose routing ?? - 05/20/08 01:01 PM
How about up under the hood? Any pics of that set up?
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/20/08 02:04 PM
Quote:
How about up under the hood? Any pics of that set up?
I'll check to see if I have any pics, if not I will take some.
Posted By: rayztoy
Re: E-body washer hose routing ?? - 05/20/08 06:26 PM
Thanks Ron.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/20/08 10:34 PM
Quote:
How about up under the hood? Any pics of that set up?
Here you go, but again not saying my car is 100% correct.
Posted By: BADBEE
Re: E-body washer hose routing ?? - 05/21/08 01:24 PM
Thanks a million!!
Posted By: MoparSam
Re: E-body washer hose routing ?? - 05/21/08 11:48 PM
Some good diagrams of this in the Dec 2000 issue of Mopar Action page 16.
If anyone wants I can try and scan it.
MoparSam
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/22/08 12:52 AM
That would be great. Thanks.
Posted By: MoparSam
Re: E-body washer hose routing ?? - 05/22/08 02:34 AM
Here is a scan of the diagram.
Posted By: rayztoy
Re: E-body washer hose routing ?? - 05/22/08 11:36 AM
Very Nice!
Thank You for posting. I wonder where you can get the 2 clips that secure the hose to the cowl?
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/22/08 11:50 AM
Quote:
Very Nice! Thank You for posting. I wonder where you can get the 2 clips that secure the hose to the cowl?
Bill Allphin 877-526-7202 or Tom at RT Specialties. But the clips they show in the large depiction in the diagram would only be used on cars with non power brakes.
Posted By: rayztoy
Re: E-body washer hose routing ?? - 05/22/08 02:27 PM
Ron, Thanks for the info and clarification.
Posted By: beepbeep
Re: E-body washer hose routing ?? - 05/22/08 03:16 PM
Quote:
Here is a scan of the diagram.
Steve, any idea what year(s) that is from? Looking at the washer bottle it is not 70/71.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/22/08 03:29 PM
Quote:
Quote:
Here is a scan of the diagram.
Steve, any idea what year(s) that is from? Looking at the washer bottle it is not 70/71.
Yep, that was my thought as well.
Posted By: beepbeep
Re: E-body washer hose routing ?? - 05/22/08 03:34 PM
Per the FAD this hose should be under the squirter.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/22/08 03:46 PM
Quote:
Per the FAD this hose should be under the squirter.
Thanks, but should it be tucked inside the hood like it is on the driver's side in my photo?
Posted By: beepbeep
Re: E-body washer hose routing ?? - 05/22/08 03:50 PM
Quote:
Quote:
Per the FAD this hose should be under the squirter.
Thanks, but should it be tucked inside the hood like it is on the driver's side in my photo?
Posted By: mo71cuda
Re: E-body washer hose routing ?? - 05/22/08 04:18 PM
Quote:
E-body washer hose routing ??
Does anyone have a diagram or can they shoot me a
few pics of how the hoses route along the apron
and up under the hood for a car with an electric
pump unit?
Has this question been answered correctly?
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/22/08 04:46 PM
Quote:
Quote:
Quote:
Per the FAD this hose should be under the squirter.
Thanks, but should it be tucked inside the hood like it is on the driver's side in my photo?
Copy the pic, I am going to remove it.
Thanks Beep, but I can't tell from the sketch if mine is correct - tucked inside the inner hood on the driver's side.
Posted By: beepbeep
Re: E-body washer hose routing ?? - 05/22/08 04:48 PM
The hose should be behind the squirter not on top of it.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/22/08 04:52 PM
Quote:
The hose should be behind the squirter not on top of it.
Yes Sir, I understand, but please look at my pic. Do you see where the hose is tucked in the inner hood, that looks wierd, but is it correct? Thanks.
Posted By: beepbeep
Re: E-body washer hose routing ?? - 05/22/08 05:01 PM
The FAD is showing it going behind the bracing like you have it. You can also push the hose up on the passenger side, but I doubt it will stay.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/22/08 05:05 PM
Thanks, I appreciate your help.
Posted By: beepbeep
Re: E-body washer hose routing ?? - 05/22/08 05:11 PM
Hope it answers you question. The FAD does not specify the hose length, it only states to leave enough slack for the hood to open on the hose going up to the hood.
Posted By: 70challrtse
Re: E-body washer hose routing ?? - 05/22/08 07:58 PM
Yes you did, I called Badalson today and he is sending the requiste length hose so that I can route it through the booster bracket as depicted in the 3400 mile survivor you posted above. Thanks again.
Posted By: MoparSam
Re: E-body washer hose routing ?? - 05/22/08 08:44 PM
Steve, any idea what year(s) that is from? Looking at the washer bottle it is not 70/71.
Beepbeep
Here is the full scan from Mopar Action including the article. The guy asks about the washer system for a 70 challenger. I didn't even notice the washer bottle thing.
Steve
