Re: Wiper Motor Rebuild
[Re: srunge55]
#590500
01/21/10 11:42 PM
01/21/10 11:42 PM
|
Joined: Aug 2007
Posts: 6,095 Valencia, España
NachoRT74
master
|
master
Joined: Aug 2007
Posts: 6,095
Valencia, España
|
an internal cam on shaft or gear. Thats the cut off power function.
With a Charger born in Chrysler assembly plant in Valencia, Venezuela
|
|
|
Re: Wiper Motor Rebuild
[Re: NachoRT74]
#590501
01/22/10 12:14 AM
01/22/10 12:14 AM
|
Joined: Nov 2003
Posts: 36,040 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,040
Lincoln Nebraska
|
Nacho is that the circuit that stays hot until it parks then the cam "opens" it there
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: Wiper Motor Rebuild
[Re: JulesdaWiperman]
#590503
01/22/10 01:09 AM
01/22/10 01:09 AM
|
Joined: Jan 2003
Posts: 1,192
MoreParts
super stock
|
super stock
Joined: Jan 2003
Posts: 1,192
|
Quote:
Steve, that contact is NOT set correctly. The contact must be closed with a slight tension on the terminal. Bend the tang slowly over the terminal and make sure it passes the terminal by 1/4 inch on the opposite side. Then slowly bring it back over the terminal so that it rests on it with tension. Jules
Jules was a big help to me with this info.
Also, when reassembling make sure you put the tab in the correct grove. Mine was installed incorrectly and I kept having to rebend until I learned the correct placement. If your part number is readable you may be able to get some help with the correct installation.
|
|
|
|
|