Previous Thread
Next Thread
Print Thread
Rear drum too big for wheel #590457
01/21/10 09:53 PM
01/21/10 09:53 PM
Joined: Jan 2007
Posts: 40
Clarkston, MI
2
2RTSE Offline OP
member
2RTSE  Offline OP
member
2

Joined: Jan 2007
Posts: 40
Clarkston, MI
I have a 70 RR that I am building. I just bought 15X10 Weld wheels and when I tried to install, the diameter of drum would not allow the wheel to slide on. The drums are 11 inch and interfere by about 1/2 inch diameter. Has anyone run into a similar problem? I have a 10 inch front drum from a previous car and it drops right in. I suppose I could try to find a 10 inch set-up but that won't be easy and I thought I'd ask here first.
Thanks,
Steve

Re: Rear drum too big for wheel [Re: 2RTSE] #590458
01/21/10 10:02 PM
01/21/10 10:02 PM
Joined: Jan 2004
Posts: 27,347
Today? Who Knows?
1_WILD_RT Offline
Management Trainee
1_WILD_RT  Offline
Management Trainee

Joined: Jan 2004
Posts: 27,347
Today? Who Knows?
An early 11" drum without the cooling fins would probably fit...

Re: Rear drum too big for wheel [Re: 1_WILD_RT] #590459
01/22/10 08:10 AM
01/22/10 08:10 AM
Joined: Jan 2003
Posts: 21,074
Niles , Ohio
T
therocks Offline
oh wait.but hey.lets see.oh yeah.
therocks  Offline
oh wait.but hey.lets see.oh yeah.
T

Joined: Jan 2003
Posts: 21,074
Niles , Ohio
I have 15x10 Weld Pro Stars on my 65.It has a 69 runner rear with 11 in brakes.No problems.Rocky


Chrysler Firepower
Re: Rear drum too big for wheel [Re: therocks] #590460
01/22/10 10:44 AM
01/22/10 10:44 AM
Joined: Jan 2003
Posts: 2,757
Gilbertsville, PA 19525
P
Pntastar69 Offline
master
Pntastar69  Offline
master
P

Joined: Jan 2003
Posts: 2,757
Gilbertsville, PA 19525
I converted to 11 x 2 brakes on my Dart but running 15 x 7 Weld Pro Stars. No problems. Here is a pic of the drum.

5752203-Dscn1094.jpg (139 downloads)
Re: Rear drum too big for wheel [Re: 1_WILD_RT] #590461
01/22/10 11:23 AM
01/22/10 11:23 AM
Joined: Jan 2007
Posts: 40
Clarkston, MI
2
2RTSE Offline OP
member
2RTSE  Offline OP
member
2

Joined: Jan 2007
Posts: 40
Clarkston, MI
According to the NAPA website, 11 inch front drums are 3/4 in. smaller O.D. than rears. I am going to give that a try.
Thank You

Re: Rear drum too big for wheel [Re: 2RTSE] #590462
01/22/10 01:06 PM
01/22/10 01:06 PM
Joined: Jan 2004
Posts: 27,347
Today? Who Knows?
1_WILD_RT Offline
Management Trainee
1_WILD_RT  Offline
Management Trainee

Joined: Jan 2004
Posts: 27,347
Today? Who Knows?
Front to rear likely won't interchange do to the offset built int the mounting surface of the drum... Not saying it won't but you need to check closely..







Powered by UBB.threads™ PHP Forum Software 7.7.1