I think I broke it... - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech I think I broke it...

Print Thread

I think I broke it... #480841 09/27/09 12:49 AM 09/27/09 12:49 AM
Joined: Aug 2005 Posts: 4,101 Yes S sixpakdodge OP master
sixpakdodge OP master S Joined: Aug 2005 Posts: 4,101 Yes	The #2, 3, and 4 mains all look like this. The cylinder walls in 1, 6, and 7 are cracked on one side each, 3 and 5 are cracked on both sides, and #8 is cracked too. It was bound to happen though. the block served me well. At least 750+ passes down the 1/4 between two different cars. Combo was always the same. 440 +.060, Steel crank, Six Pack rods, flat tops, Comp .650 solid, 452 heads, M-1 intake, and a 1050 Dominator. It went 9.73 @ 138 at the beginning of the year in my Plymouth. 5508276-10119_1218579631165_1429125082_626562_3047804_n.jpg (127 downloads)

Re: I think I broke it... [Re: sixpakdodge] #480842 09/27/09 06:48 AM 09/27/09 06:48 AM
Joined: Jul 2003 Posts: 977 Colorado 5 506RR super stock
506RR super stock 5 Joined: Jul 2003 Posts: 977 Colorado	I think you got your money's worth!

Re: I think I broke it... [Re: sixpakdodge] #480843 09/27/09 07:12 AM 09/27/09 07:12 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Yep you broke it... time to find out the scrap rate for cast iron

Re: I think I broke it... [Re: MR_P_BODY] #480844 09/27/09 08:36 AM 09/27/09 08:36 AM
Joined: Jun 2005 Posts: 6,257 gulfport, ms, west mi rowin4 master
rowin4 master Joined: Jun 2005 Posts: 6,257 gulfport, ms, west mi	Call Chrysler and ask the what kind of crap they are passing off to the public, can't even get 1,000 pass's [ 250 ] miles out of their blocks. Putting the juice to it ? it's ok to butt heads, just don't do it with a butthead

Re: I think I broke it... [Re: rowin4] #480845 09/27/09 08:54 AM 09/27/09 08:54 AM
Joined: Jan 2003 Posts: 1,990 , PA sleepyhead416 top fuel
sleepyhead416 top fuel Joined: Jan 2003 Posts: 1,990 , PA	BRUTUS That brings back memories,

Re: I think I broke it... [Re: rowin4] #480846 09/27/09 08:56 AM 09/27/09 08:56 AM
Joined: Feb 2003 Posts: 12,675 Columbia, CT M moper I Live Here
moper I Live Here M Joined: Feb 2003 Posts: 12,675 Columbia, CT	It needed a girdle and it would have lived. 6pac rods? You did so much wrong initially and that's why it didnt go 800 runs... (jk) Well, art is art, isn't it? Still, on the other hand, water is water! And east is east and west is west and if you take cranberries and stew them like applesauce they taste much more like prunes than rhubarb does. Now, uh... Now you tell me what you know.

Re: I think I broke it... [Re: sixpakdodge] #480847 09/27/09 09:08 AM 09/27/09 09:08 AM
Joined: Jan 2005 Posts: 866 Winnipeg ,Mb. CA. chryco super stock
chryco super stock Joined: Jan 2005 Posts: 866 Winnipeg ,Mb. CA.	Quote: The #2, 3, and 4 mains all look like this. The cylinder walls in 1, 6, and 7 are cracked on one side each, 3 and 5 are cracked on both sides, and #8 is cracked too. It was bound to happen though. the block served me well. At least 750+ passes down the 1/4 between two different cars. Combo was always the same. 440 +.060, Steel crank, Six Pack rods, flat tops, Comp .650 solid, 452 heads, M-1 intake, and a 1050 Dominator. It went 9.73 @ 138 at the beginning of the year in my Plymouth. YUP ! Sure looks broke to me ! Best of luck on the new build ! Gas is fer washin' parts ....Alky`s fer drinkin' ...Nitro`s fer Racin'!

Re: I think I broke it... [Re: rowin4] #480848 09/27/09 11:05 AM 09/27/09 11:05 AM
Joined: Aug 2005 Posts: 4,101 Yes S sixpakdodge OP master
sixpakdodge OP master S Joined: Aug 2005 Posts: 4,101 Yes	Quote: Call Chrysler and ask the what kind of crap they are passing off to the public, can't even get 1,000 pass's [ 250 ] miles out of their blocks. Putting the juice to it ? All throttle, I have never and will never juice anything. It could have a 1,000 runs on it actually. The motor was in the '64 Dodge when we got in in 1995. God only knows how many runs the prior owner made on the motor. The new motor will have a girdle, alum. rods, pistons, etc. I'm actually thinking of a Mega Block.

Re: I think I broke it... [Re: sixpakdodge] #480849 09/27/09 07:54 PM 09/27/09 07:54 PM
Joined: Feb 2003 Posts: 2,560 S.E. Michigan cl440 master
cl440 master Joined: Feb 2003 Posts: 2,560 S.E. Michigan	Been there, done that (more than once) I say you got your moneys worth!!!! 5509592-Duster4-19-09.jpg (56 downloads)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1