Re: Yoke bushing install Question on AAR cuda.
[Re: AAR70]
#473042
09/20/09 09:54 AM
09/20/09 09:54 AM
|
Joined: Mar 2003
Posts: 15,489 the boonies
aarcuda
I Live Here
|
I Live Here
Joined: Mar 2003
Posts: 15,489
the boonies
|
Quote:
I am ready to install a new yoke busing on my manuell A 833 extension housing.
Anyone who know which way should the hole in the bushing turn?
Lau.
Nice tool!!
I was just looking at my yoke on my 727 and thought it was loose. probably need to get that replaced soon
|
|
|
Re: Yoke bushing install Question on AAR cuda.
[Re: aarcuda]
#473043
09/20/09 09:56 AM
09/20/09 09:56 AM
|
Joined: Jan 2003
Posts: 75,005 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,005
U.S.S.A.
|
Quote:
Quote:
I am ready to install a new yoke busing on my manuell A 833 extension housing.
Anyone who know which way should the hole in the bushing turn?
Lau.
Nice tool!!
I was just looking at my yoke on my 727 and thought it was loose. probably need to get that replaced soon
Steve , I have the tools in that picture , shoot me your address if you think you are goingto do it and I'll send them down .
|
|
|
Re: Yoke bushing install Question on AAR cuda.
[Re: cuda-sweden]
#473046
09/20/09 05:05 PM
09/20/09 05:05 PM
|
Joined: May 2005
Posts: 6,446 NJ-USA
HPMike
master
|
master
Joined: May 2005
Posts: 6,446
NJ-USA
|
Quote:
hej,do anyone know if that tool is still availible for buying somewhere?i lay under my cuda 4 speed and i could jank the prop shaft up and down a lot,at least 1/ 16" if not more.if i where in us of a i would send it to passon or brewers but im in sweden,hej aar.is there somewhere to buy special tools for a 4speed? over and out.
Just get the tool and do it yourself. A five year old can do it with that tool. I would venture to guess that even a good trans shop in Sweden or Kazakhstan might have the tool, it's been around for 40 years. The bushing is the same as a 727, and it's also the same as a Ford C-6.
MB
|
|
|
Re: Yoke bushing install Question on AAR cuda.
[Re: cuda-sweden]
#473047
09/20/09 07:17 PM
09/20/09 07:17 PM
|
Joined: Jan 2003
Posts: 75,005 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,005
U.S.S.A.
|
Quote:
hej,do anyone know if that tool is still availible for buying somewhere?i lay under my cuda 4 speed and i could jank the prop shaft up and down a lot,at least 1/ 16" if not more.if i where in us of a i would send it to passon or brewers but im in sweden,hej aar.is there somewhere to buy special tools for a 4speed? over and out.
yes , Miller /SpX has the tools in the picture above , if you do a search of posts by the thread starter you will find the thread where he asks about the tools and I gave him the link for the tools .
|
|
|
Re: Yoke bushing install Question on AAR cuda.
[Re: JohnRR]
#473049
09/20/09 10:32 PM
09/20/09 10:32 PM
|
Joined: Mar 2003
Posts: 15,489 the boonies
aarcuda
I Live Here
|
I Live Here
Joined: Mar 2003
Posts: 15,489
the boonies
|
Quote:
Quote:
Quote:
I am ready to install a new yoke busing on my manuell A 833 extension housing.
Anyone who know which way should the hole in the bushing turn?
Lau.
Nice tool!!
I was just looking at my yoke on my 727 and thought it was loose. probably need to get that replaced soon
Steve , I have the tools in that picture , shoot me your address if you think you are goingto do it and I'll send them down .
I'll let you know!. i'll probably need to yank the tranny out to replace the rear drum and band this winter so I'll keep your offer in mind- if I cant borrow one from an acquaintance that owns a tranny shop
|
|
|
Re: Yoke bushing install Question on AAR cuda.
[Re: cuda-sweden]
#473051
09/22/09 11:07 AM
09/22/09 11:07 AM
|
Joined: Dec 2008
Posts: 210 Denmark, Helsingor
AAR70
OP
enthusiast
|
OP
enthusiast
Joined: Dec 2008
Posts: 210
Denmark, Helsingor
|
Thank you guy´s for answer Anders ,you can borrow the Miller/spx tool from me! Lau
Last edited by AAR70; 09/25/09 11:30 AM.
|
|
|
|
|