Does anyone have the cam card info on this old cam? Sold by Direct Connection many moons ago...

That should be 280 degrees at .050, .4468 lobe lift ground on 108 lobe sepperation angle on both lobes if I'm inturpreting (SP?) those numbers correctly

That's right Cab, just hoping for the rest of the install numbers. I ran one of these 20 years ago, and don't remember the details.

Crane cam chart, the one highlighted is not yours, i reckon yours might be R280 450.

Deaks, don't think U highlited the right cam. Don't think I see it here. Cab's comments are right, 670 lift[1.5]. We installed it at 103.5 and set lash at .026 500" 440-1 motor. Great sounding cam, still have it.














i

Bill, What compression are you running and how's the e.t.? I'm going to use my old Stage VI's on mine...so it will be considerably slower.

Ran that cam til 03. Motor 500" 440-1 14-1 1150 dom on 440=3 intake made 766hp at 7000, 670 tq at 5200. Ran 9.70's. Great rebuild in 03 by Lynn Balek, changed little xcept now Comp Cam picked up 60hp and 30#tq.

New question on this old subject, I've been running this cam installed at 102* thinking of retarding it to 106*-110* any predictions on the result of this change?

Barnstorm, Hey Bill, what were the specs on the Comp Cam that picked up 60 hp?

as to Comp Cam #??