I'm currently helping a buddy put a 5.7 hemi from an 07 pickup into a 70 satellite that had a 318. The trans is an A-727. We,ve heard that this swap has been done using stock 5.7 exhaust manifolds but have never actually seen a sample. Any help in this area would be greatly appreciated. Thank you, Bill

There's at least two other threads going on this rignt now. Here's one:

https://board.moparts.org/ubbthreads/show...e=2#Post5428557

I used stock 5.7 car manifolds on mine. i dont have any real good pics of the manifolds but i can take some.

i will use the stock 5.7 manifolds on my project as well.
There are some pics in both of the links I posted of the frame rail mod I made so the exhaust flange will clear.

Yes on a A body the passenger frame rail needed to be modified.

drivers side 69 Dart

pass side