5.7 hemi into 70 satellite

I'm currently helping a buddy put a 5.7 hemi from an 07 pickup into a 70 satellite that had a 318. The trans is an A-727. We,ve heard that this swap has been done using stock 5.7 exhaust manifolds but have never actually seen a sample. Any help in this area would be greatly appreciated. Thank you, Bill

There's at least two other threads going on this rignt now. Here's one:

https://board.moparts.org/ubbthreads/show...e=2#Post5428557

I used stock 5.7 car manifolds on mine. i dont have any real good pics of the manifolds but i can take some.

Quote:

---

I used stock 5.7 car manifolds on mine. i dont have any real good pics of the manifolds but i can take some.

---

Took me a sec to figure out what I was looking at there. What body did you do this swap to? How'd the manifolds fit?