who's using what? and how is the fit? im tired of climbing over the bars

Mine was fabbed back in the '70s, not a kit. Downbar has a sleeved tube at the back where it joins the hoop, with a receiver cup. Quick-release pin. Probably not as stiff structurally as a welded-in downbar, bit it's a vintage car and I ain't changin' it.
There's a restraining strap on the driver's door at the hinge pillar to limit its opening, so I can reach it belted in.

Chassisworks

Here is a spring loaded one that you can just shut and dont need to put a pin in.
https://www.secureway1.com/alston/index.php?productID=168

Heres mine custom made like the rest of the roll bar..

Another shot...

thx guys,, anymore pix from other car's?

Mine

very nice,,

chasiworks

another

Mine is a S&W 8 point kit with swing out bars
on both sides (semi street car) fits well and
easy to enter/exit.

I will try to post or email a picture.

Chasiss works here,i made the top longer than normal because im old and its great to lean on getting out.

ok whos got there wesite lol

http://www.cachassisworks.com/

Here is mine, had them made.