426 wedge - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 426 wedge

Print Thread

426 wedge #320323 05/17/09 12:23 PM 05/17/09 12:23 PM
Joined: Oct 2006 Posts: 84 oklahoma 7 72383cudaman OP member
72383cudaman OP member 7 Joined: Oct 2006 Posts: 84 oklahoma	will stock 383 pistons on 440 rods work in a 426 wedge?

Re: 426 wedge [Re: 72383cudaman] #320324 05/17/09 02:37 PM 05/17/09 02:37 PM
Joined: Nov 2004 Posts: 2,825 Sk. Canada RemCharger master
RemCharger master Joined: Nov 2004 Posts: 2,825 Sk. Canada	I don't think so, the c/h would be too low. Or I should say it will but you'll make about 150hp.

Re: 426 wedge [Re: 72383cudaman] #320325 05/17/09 09:10 PM 05/17/09 09:10 PM
Joined: Dec 2005 Posts: 261 Eastern ohio Alexdodge enthusiast
Alexdodge enthusiast Joined: Dec 2005 Posts: 261 Eastern ohio	Been there done that. Big mistake! Buy the 426 pistons. Hughes Engines sells them, look under rare and obsolete engines on their web site. About $520.00 set.

Re: 426 wedge [Re: Alexdodge] #320326 05/17/09 09:14 PM 05/17/09 09:14 PM
Joined: Jul 2008 Posts: 30,424 Florida STAYcation dOrk ! The village idiot's idiot
dOrk ! The village idiot's idiot Joined: Jul 2008 Posts: 30,424 Florida STAYcation	They will work GREAT ... if you use a 4.15 crank !!

Re: 426 wedge [Re: dOrk !] #320327 05/17/09 09:32 PM 05/17/09 09:32 PM
Joined: Dec 2005 Posts: 261 Eastern ohio Alexdodge enthusiast
Alexdodge enthusiast Joined: Dec 2005 Posts: 261 Eastern ohio	Wish I knew that about 2 years ago!!

Re: 426 wedge [Re: Alexdodge] #320328 05/18/09 01:02 AM 05/18/09 01:02 AM
Joined: Oct 2006 Posts: 84 oklahoma 7 72383cudaman OP member
72383cudaman OP member 7 Joined: Oct 2006 Posts: 84 oklahoma	alright thanks guys

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1