Posted By: 72383cudaman
426 wedge - 05/17/09 04:23 PM
will stock 383 pistons on 440 rods work in a 426 wedge? 
426 wedge
Posted By: RemCharger
Re: 426 wedge - 05/17/09 06:37 PM
I don't think so, the c/h would be too low. Or I should say it will but you'll make about 150hp.
Posted By: Alexdodge
Re: 426 wedge - 05/18/09 01:10 AM
Been there done that. Big mistake! Buy the 426 pistons.
Hughes Engines sells them, look under rare and obsolete engines on their web site. About $520.00 set.
Hughes Engines sells them, look under rare and obsolete engines on their web site. About $520.00 set.
Posted By: dOoC
Re: 426 wedge - 05/18/09 01:14 AM
They will work GREAT ... if you use a 4.15 crank !! 
Posted By: Alexdodge
Re: 426 wedge - 05/18/09 01:32 AM
Wish I knew that about 2 years ago!!
Posted By: 72383cudaman
Re: 426 wedge - 05/18/09 05:02 AM
alright thanks guys