|
Small Block Blower???
#314276
05/10/09 11:39 PM
05/10/09 11:39 PM
|
Joined: Dec 2006
Posts: 506 Texas Afghanistan Iraq etc.
DakFink
OP
mopar
|
OP
mopar
Joined: Dec 2006
Posts: 506
Texas Afghanistan Iraq etc.
|
Looking for info on Blower/Screw/Roots style Superchargers for Small-Blocks. I know they have been done. I've seen a few Here & there. I just can't find a company that still carries the parts to for them. Especially the intake side. Any Help or Guidance would be appreciated.
|
|
|
Re: Small Block Blower???
[Re: DakFink]
#314277
05/11/09 01:36 AM
05/11/09 01:36 AM
|
Joined: Sep 2007
Posts: 576 Escondido, CA
kick_the_reverb
mopar
|
mopar
Joined: Sep 2007
Posts: 576
Escondido, CA
|
Intakes are available, just not cheap. BDS sells them, for example. Also an Australian guy casts his own. Best plan is to buy a used one for about half of the ridiculous price BDS, INDY, etc charge. Drive is also a little problematic - meaning you can get it from the various blower shops, but they don't float around in the used market so much.
Good luck, Ran
"Hey mister, something's wrong with your car, it idles roughly" - number one comment I got in Israel when daily driving a 70 Barracuda with a lopey cam.
Currently working on - 1966 Dodge A100 van 318/auto Finally - disc brakes on the front. In the plans - rear disc brakes, B&M 250 blower
|
|
|
Re: Small Block Blower???
[Re: DakFink]
#314280
05/11/09 08:11 AM
05/11/09 08:11 AM
|
Joined: Mar 2006
Posts: 9,835 MI, usa
dvw
master
|
master
Joined: Mar 2006
Posts: 9,835
MI, usa
|
Depends on quick you want to go. I have an old Dyers set-up. It's a 6-V71 mounted on a modified 4 barrel intake. motor is a 340+.030",245@.050" cam,ported stock heads,7.8-1 compression. With a 9" converter,4.30 gear,drag radials. 11.17@121 thru the mufflers in a 3850lb Volare. The blower is loose and worn beyond clearance specs. I run it 9% over at 12 lbs boost. Doug
|
|
|
Re: Small Block Blower???
[Re: MR_P_BODY]
#314282
05/11/09 09:31 AM
05/11/09 09:31 AM
|
Joined: Oct 2007
Posts: 4,206 New York
polyspheric
master
|
master
Joined: Oct 2007
Posts: 4,206
New York
|
make a manifold for my 8-71 using a tunnel ram lower then weld a mounting plate to it
Better than almost all the commercial manifolds, too.
Boffin Emeritus
|
|
|
|
|
|