2nd Gen Hemi mounts - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 2nd Gen Hemi mounts

Print Thread

2nd Gen Hemi mounts #2830345 10/08/20 12:37 PM 10/08/20 12:37 PM
Joined: Jun 2006 Posts: 916 MB,CAN PC-CHARGER OP super stock
PC-CHARGER OP super stock Joined: Jun 2006 Posts: 916 MB,CAN	Does anyone have a drawing showing the location of the engine mount holes on a 2nd Gen Hemi.The ones I need are the three bolt holes that hold the mount bracket to the side of the engine.

Re: 2nd Gen Hemi mounts [Re: PC-CHARGER] #2830704 10/09/20 11:10 AM 10/09/20 11:10 AM
Joined: Dec 2004 Posts: 88 Arizona 4 410mopar member
410mopar member 4 Joined: Dec 2004 Posts: 88 Arizona	Do you want a real official drawing, or can I just measure my 65 brackets and give you the measurement?

Re: 2nd Gen Hemi mounts [Re: 410mopar] #2831021 10/10/20 07:52 AM 10/10/20 07:52 AM
Joined: Jun 2014 Posts: 1,321 VA D dragon slayer pro stock
dragon slayer pro stock D Joined: Jun 2014 Posts: 1,321 VA	I am confused. Your talking 426 hemi correct? Left and Right brackets are different, B and E are different. Also some changes over the years. Yes the block studs are the same and if that is the pattern you need, you can pull it from a block,

Re: 2nd Gen Hemi mounts [Re: dragon slayer] #2831025 10/10/20 08:02 AM 10/10/20 08:02 AM
Joined: Sep 2005 Posts: 1,978 USA S Suregrip391 top fuel
Suregrip391 top fuel S Joined: Sep 2005 Posts: 1,978 USA	He probably has one of those earlier blocks with the 440 mounts and needs to drill and tap for original Hemi mounts on the pad because they were not done when the block was machined. I had one of those once.

Re: 2nd Gen Hemi mounts [Re: dragon slayer] #2831026 10/10/20 08:03 AM 10/10/20 08:03 AM
Joined: Mar 2011 Posts: 3,075 Michigan A A727Tflite master
A727Tflite master A Joined: Mar 2011 Posts: 3,075 Michigan	Brackets also differ between the 64-65 and the 66-71.

Re: 2nd Gen Hemi mounts [Re: A727Tflite] #2831148 10/10/20 01:43 PM 10/10/20 01:43 PM
Joined: Dec 2004 Posts: 88 Arizona 4 410mopar member
410mopar member 4 Joined: Dec 2004 Posts: 88 Arizona	PC-Charger Please clarify. What exactly do you want? I'm willing to help.

Re: 2nd Gen Hemi mounts [Re: 410mopar] #2832056 10/12/20 07:52 PM 10/12/20 07:52 PM
Joined: Jan 2012 Posts: 2,645 Stuttgart, Arkansas rickseeman master
rickseeman master Joined: Jan 2012 Posts: 2,645 Stuttgart, Arkansas	The diagram is in the Mopar engine manual 2011 Drag Pak Challenger

Re: 2nd Gen Hemi mounts [Re: A727Tflite] #2832107 10/12/20 09:26 PM 10/12/20 09:26 PM
Joined: Aug 2003 Posts: 43,157 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,157 Bend,OR USA	Originally Posted by Transman Brackets also differ between the 64-65 and the 66-71. Street hemi versus race steel block hemi mounts also Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1