Does any one know of a source for this /6 to NP-435 brace? - Moparts Forums

Register Log In Moparts Forums Sandy's Truck Shop Does any one know of a source for this /6 to NP-435 brace?

Print Thread

Does any one know of a source for this /6 to NP-435 brace? #2767494 04/23/20 04:00 PM 04/23/20 04:00 PM
Joined: Jan 2003 Posts: 29,650 Hamtramck, PA A Alaskan_TA OP Fluffy Balladeer
Alaskan_TA OP Fluffy Balladeer A Joined: Jan 2003 Posts: 29,650 Hamtramck, PA	A pal is looking for one of these (marked with the red XXXXs) does anyone know of a source for this brace? Thanks!

Re: Does any one know of a source for this /6 to NP-435 brace? [Re: Alaskan_TA] #2767959 04/24/20 09:38 PM 04/24/20 09:38 PM
Joined: Jul 2009 Posts: 794 massachusetts U.S.A. 1 1969ronnie super stock
1969ronnie super stock 1 Joined: Jul 2009 Posts: 794 massachusetts U.S.A.	hello Alaska , that brace is listed in the mopar parts books under section 6-09-11 and they call it a " Trans Housing to Cylinder Block Strut" part # 2468197 new , but just go get one out of a pick a part or junkyard . Ronnie

Re: Does any one know of a source for this /6 to NP-435 brace? [Re: Alaskan_TA] #2768372 04/26/20 10:52 AM 04/26/20 10:52 AM
Joined: Apr 2005 Posts: 673 Emmett, Idaho S SuperStockWagon mopar
SuperStockWagon mopar S Joined: Apr 2005 Posts: 673 Emmett, Idaho	I have one from a /6 to a 833OD..probably the same. PM me if he still needs it. NHRA Stock/SuperStock Class Racing..Engineered Muscle In Motion!

Re: Does any one know of a source for this /6 to NP-435 brace? [Re: SuperStockWagon] #2769155 04/28/20 03:17 PM 04/28/20 03:17 PM
Joined: Jan 2003 Posts: 29,650 Hamtramck, PA A Alaskan_TA OP Fluffy Balladeer
Alaskan_TA OP Fluffy Balladeer A Joined: Jan 2003 Posts: 29,650 Hamtramck, PA	Thanks. The 833 version is different though, that has already been ruled out.

Re: Does any one know of a source for this /6 to NP-435 brace? [Re: Alaskan_TA] #2769198 04/28/20 05:16 PM 04/28/20 05:16 PM
Joined: May 2004 Posts: 136 MN 5 58pwrwgn member
58pwrwgn member 5 Joined: May 2004 Posts: 136 MN	Ronher's auto parts in Wilmer, MN had a slant six np 435 combo laying in the dirt by the dodge trucks a year ago. Do the slant 6 and small block share the same bellhousing. I was thinking about a 5.7 swap in my truck. I would need to change my 12 inch hydraulic bell to a 11 inch so i could find a flywheel.

Re: Does any one know of a source for this /6 to NP-435 brace? [Re: 58pwrwgn] #2769217 04/28/20 06:51 PM 04/28/20 06:51 PM
Joined: Jan 2003 Posts: 29,650 Hamtramck, PA A Alaskan_TA OP Fluffy Balladeer
Alaskan_TA OP Fluffy Balladeer A Joined: Jan 2003 Posts: 29,650 Hamtramck, PA	/6 bell is different. Interested in that brace though!

Re: Does any one know of a source for this /6 to NP-435 brace? [Re: Alaskan_TA] #2786882 06/18/20 04:15 PM 06/18/20 04:15 PM
Joined: Jan 2003 Posts: 29,650 Hamtramck, PA A Alaskan_TA OP Fluffy Balladeer
Alaskan_TA OP Fluffy Balladeer A Joined: Jan 2003 Posts: 29,650 Hamtramck, PA	58pwrwgn thanks for the tip! I was able to get that one, but....... It is not the right one either. Does anyone else happen to know how or where to find one?

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1