TTI Headers - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer TTI Headers

Print Thread

TTI Headers #270182 03/29/09 10:21 AM 03/29/09 10:21 AM
Joined: Feb 2003 Posts: 81 Federal way washington B BasinStBlue OP member
BasinStBlue OP member B Joined: Feb 2003 Posts: 81 Federal way washington	any good deals on tti headers out there?

Re: TTI Headers [Re: BasinStBlue] #270183 03/29/09 10:27 AM 03/29/09 10:27 AM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	shhhh here's the best deal...ready buy a different brand. You can get a good set of hookers or the like for less than 1/2 the price as TTi's [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Re: TTI Headers [Re: Mr.Yuck] #270184 03/29/09 01:16 PM 03/29/09 01:16 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	Hookers are 1/2 the price cause they are 1/4 as good. not have price coated to coated Had two sets of Hooker big dollar super comps and never again!!!!

Re: TTI Headers [Re: Dodgem] #270185 03/29/09 02:32 PM 03/29/09 02:32 PM
Joined: Apr 2005 Posts: 12,271 Overpriced Housing Central RobX4406 I Live Here
RobX4406 I Live Here Joined: Apr 2005 Posts: 12,271 Overpriced Housing Central	What model car and engine? If it's a SB A body, buy Dougs. Less expensive same style, no low pipes fit.

Re: TTI Headers [Re: Mr.Yuck] #270186 03/29/09 03:06 PM 03/29/09 03:06 PM
Joined: May 2003 Posts: 13,200 aZLiViN J J_BODY I Live Here
J_BODY I Live Here J Joined: May 2003 Posts: 13,200 aZLiViN	Quote: shhhh here's the best deal...ready buy a different brand. You can get a good set of hookers or the like for less than 1/2 the price as TTi's Having many sets of "header-aches" it was a joy to pull the TTI's from the box and have them FIT our W5 topped 340 in our Duster. I don't think they charged enough. I got ours through Troy when he was at Westoaks.

Re: TTI Headers [Re: J_BODY] #270187 03/29/09 05:31 PM 03/29/09 05:31 PM
Joined: Jun 2008 Posts: 3,916 usa L lewtot184 master
lewtot184 master L Joined: Jun 2008 Posts: 3,916 usa	i have a set of 2" tti's on my 65 coronet 440 six-pak. with the engine raised up its about a 30 minute job to install them, 45 minutes if i drink a pop. they are pricey but, i didn't need band aids or four letter words.

Re: TTI Headers [Re: BasinStBlue] #270188 03/29/09 07:06 PM 03/29/09 07:06 PM
Joined: Aug 2005 Posts: 21 Southeast MI 7 71360rag member
71360rag member 7 Joined: Aug 2005 Posts: 21 Southeast MI	I have TTI headers on my small block ebody, I agree with the post above, they installed in less than an hour with no skinned knuckles and 3 years later they are in excellent shape. Not cheap but they are a quality product.

Re: TTI Headers [Re: BasinStBlue] #270189 03/29/09 08:02 PM 03/29/09 08:02 PM
Joined: Aug 2005 Posts: 11,543 chicagoland,usa B buildanother I Live Here
buildanother I Live Here B Joined: Aug 2005 Posts: 11,543 chicagoland,usa	Had a new set of hooker headers once. That's all it took.

Re: TTI Headers [Re: buildanother] #270190 03/29/09 08:21 PM 03/29/09 08:21 PM
Joined: Jul 2005 Posts: 757 Toronto, Ont, Canada boydsdodge super stock
boydsdodge super stock Joined: Jul 2005 Posts: 757 Toronto, Ont, Canada	I had an easier time installing TTi headers then iron manifolds.

Re: TTI Headers [Re: 71360rag] #270191 03/29/09 08:25 PM 03/29/09 08:25 PM
Joined: Jan 2003 Posts: 3,623 Millinocket, Maine J JonC master
JonC master J Joined: Jan 2003 Posts: 3,623 Millinocket, Maine	Quote: I have TTI headers on my small block ebody, I agree with the post above, they installed in less than an hour with no skinned knuckles and 3 years later they are in excellent shape. Not cheap but they are a quality product. Mine fit perfect, but I am sure someone will bash TTI's soon.

Re: TTI Headers [Re: boydsdodge] #270192 03/29/09 08:30 PM 03/29/09 08:30 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	$90 Summits... pass side 10 minutes Driver s side 30 if that. Used all the factory studs. Headers are as easy as you make them. try and slma them in w/o unbolting stuff and they are a pain. Take your time and they aren't so bad. I've never had problems w/ any header. take you time, jack the engine up, move the steering out of the way and it's not too bad. But hey you got $700 to spend have at it. They won't install any easier than any other. Oh yeah I had TTi step's on my 340 swinger too... 5128146-4402.JPG (45 downloads) [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Re: TTI Headers [Re: Mr.Yuck] #270193 03/29/09 08:40 PM 03/29/09 08:40 PM
A Anonymous Unregistered
Anonymous Unregistered A	Pssst...tti's go on in less then 45 minutes BOTH sides..and when you put them on,you won't be taking them off because they hit every little bump in the road like EVERY other brand out there,you get what you pay for quality cost always has always will...

Re: TTI Headers #270194 03/29/09 09:11 PM 03/29/09 09:11 PM
Joined: Jan 2005 Posts: 469 In a van, down by the river J jmf340 mopar
jmf340 mopar J Joined: Jan 2005 Posts: 469 In a van, down by the river	and they have some nice thick flanges. Got Mopar???

Re: TTI Headers #270195 03/30/09 12:49 PM 03/30/09 12:49 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Quote: Pssst...tti's go on in less then 45 minutes BOTH sides..and when you put them on,you won't be taking them off because they hit every little bump in the road like EVERY other brand out there,you get what you pay for quality cost always has always will... you guys nust go 4 wheeling or something. I've never dragged, scraped or bent my headers on anything... no matter what brand. Must be and A-body thing

Re: TTI Headers [Re: Mr.Yuck] #270196 03/30/09 12:58 PM 03/30/09 12:58 PM
Joined: Jan 2006 Posts: 735 Spokane,WA G Genuinejed super stock
Genuinejed super stock G Joined: Jan 2006 Posts: 735 Spokane,WA	Meanwhile back at the ranch..... The original poster wanted to know if there are any good deals to be had. I don't know that you're going to find any discounts unless you buy used ones, and that doesn't seem to happen much. I paid 697$ plus 75$ shipping from Mancini racing. 1968 Plymouth road runner 1968 Dodge Coronet 500 64 D200 Good, Fast, Cheap. Pick Two.

Re: TTI Headers [Re: Genuinejed] #270197 03/30/09 01:42 PM 03/30/09 01:42 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	here... maybe you can get them for a little less than 700. http://cgi.ebay.com/ebaymotors/Mopar-A-B...sQ5fAccessories

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1