Posted By: BasinStBlue
TTI Headers - 03/29/09 02:21 PM
any good deals on tti headers out there? 
TTI Headers
Posted By: Mr.Yuck
Re: TTI Headers - 03/29/09 02:27 PM
shhhh here's the best deal...ready buy a different brand. You can get a good set of hookers or the like for less than 1/2 the price as TTi's
Posted By: Dodgem
Re: TTI Headers - 03/29/09 05:16 PM
Hookers are 1/2 the price cause they are 1/4 as good. not have price coated to coated
Had two sets of Hooker big dollar super comps and never again!!!!
Had two sets of Hooker big dollar super comps and never again!!!!
Posted By: RobX4406
Re: TTI Headers - 03/29/09 06:32 PM
What model car and engine?
If it's a SB A body, buy Dougs. Less expensive same style, no low pipes fit.
If it's a SB A body, buy Dougs. Less expensive same style, no low pipes fit.
Posted By: J_BODY
Re: TTI Headers - 03/29/09 07:06 PM
Quote:
shhhh here's the best deal...ready buy a different brand. You can get a good set of hookers or the like for less than 1/2 the price as TTi's
Having many sets of "header-aches" it was a joy to pull the TTI's from the box and have them FIT our W5 topped 340 in our Duster. I don't think they charged enough. I got ours through Troy when he was at Westoaks.
Posted By: lewtot184
Re: TTI Headers - 03/29/09 09:31 PM
i have a set of 2" tti's on my 65 coronet 440 six-pak. with the engine raised up its about a 30 minute job to install them, 45 minutes if i drink a pop. they are pricey but, i didn't need band aids or four letter words.
Posted By: 71360rag
Re: TTI Headers - 03/29/09 11:06 PM
I have TTI headers on my small block ebody, I agree with the post above, they installed in less than an hour with no skinned knuckles and 3 years later they are in excellent shape. Not cheap but they are a quality product.
Posted By: buildanother
Re: TTI Headers - 03/30/09 12:02 AM
Had a new set of hooker headers once. That's all it took. 
Posted By: boydsdodge
Re: TTI Headers - 03/30/09 12:21 AM
I had an easier time installing TTi headers then iron manifolds. 
Posted By: JonC
Re: TTI Headers - 03/30/09 12:25 AM
Quote:
I have TTI headers on my small block ebody, I agree with the post above, they installed in less than an hour with no skinned knuckles and 3 years later they are in excellent shape. Not cheap but they are a quality product.
Mine fit perfect, but I am sure someone will bash TTI's soon.
Posted By: Mr.Yuck
Re: TTI Headers - 03/30/09 12:30 AM
$90 Summits... pass side 10 minutes Driver s side 30 if that. Used all the factory studs. Headers are as easy as you make them. try and slma them in w/o unbolting stuff and they are a pain. Take your time and they aren't so bad. I've never had problems w/ any header. take you time, jack the engine up, move the steering out of the way and it's not too bad. But hey you got $700 to spend have at it. They won't install any easier than any other. Oh yeah I had TTi step's on my 340 swinger too...
Posted By: Anonymous
Re: TTI Headers - 03/30/09 12:40 AM
Pssst...tti's go on in less then 45 minutes BOTH sides..and when you put them on,you won't be taking them off because they hit every little bump in the road like EVERY other brand out there,you get what you pay for quality cost always has always will...
Posted By: jmf340
Re: TTI Headers - 03/30/09 01:11 AM
and they have some nice thick flanges.
Posted By: Mr.Yuck
Re: TTI Headers - 03/30/09 04:49 PM
Quote:
Pssst...tti's go on in less then 45 minutes BOTH sides..and when you put them on,you won't be taking them off because they hit every little bump in the road like EVERY other brand out there,you get what you pay for quality cost always has always will...
you guys nust go 4 wheeling or something. I've never dragged, scraped or bent my headers on anything... no matter what brand. Must be and A-body thing
Posted By: Genuinejed
Re: TTI Headers - 03/30/09 04:58 PM
Meanwhile back at the ranch.....
The original poster wanted to know if there are any good deals to be had. I don't know that you're going to find any discounts unless you buy used ones, and that doesn't seem to happen much. I paid 697$ plus 75$ shipping from Mancini racing.
The original poster wanted to know if there are any good deals to be had. I don't know that you're going to find any discounts unless you buy used ones, and that doesn't seem to happen much. I paid 697$ plus 75$ shipping from Mancini racing.
Posted By: Mr.Yuck
Re: TTI Headers - 03/30/09 05:42 PM
here... maybe you can get them for a little less than 700.
http://cgi.ebay.com/ebaymotors/Mopar-A-B...sQ5fAccessories
http://cgi.ebay.com/ebaymotors/Mopar-A-B...sQ5fAccessories