Re: mechanical fuel inj. nozzles
[Re: merpar]
#2648604
04/24/19 08:30 PM
04/24/19 08:30 PM
|
Joined: Dec 2006
Posts: 2,110 Byron, NY
W.I.N. Racing
top fuel
|
top fuel
Joined: Dec 2006
Posts: 2,110
Byron, NY
|
Its not that simple...for clean out just run it til it stumbles then your good. Define "run it on race gas"? just for clean out?
'01 P1500, Blown/Inj BAE,/Veney ,Bruno/CS2,Dana 60 '01 Dodge 3500 S Cummins Auto, Fresh air kit, 4" Exhaust, '05 Dodge Magnum R/T - Too Much to list '60 Willys CJ5 '01 International LPX - Project,DT466, Allison '64 Plymouth Valiant, Inj 528 Hemi, 2spd
|
|
|
Re: mechanical fuel inj. nozzles
[Re: merpar]
#2648839
04/25/19 12:46 PM
04/25/19 12:46 PM
|
Joined: Aug 2003
Posts: 43,163 Bend,OR USA
Cab_Burge
I Win
|
I Win
Joined: Aug 2003
Posts: 43,163
Bend,OR USA
|
Does the top end lube for alcohol stop the crystals forming? If so are you using it?
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|
|
|
Re: mechanical fuel inj. nozzles
[Re: merpar]
#2648953
04/25/19 05:34 PM
04/25/19 05:34 PM
|
Joined: Feb 2008
Posts: 714 Central TEXAS!!!!
sr4440
super stock
|
super stock
Joined: Feb 2008
Posts: 714
Central TEXAS!!!!
|
to answer your question 8ea .028 nozzles are .004926 sq inches 8 ea .020 nozzles are .002513 sq inches 8 ea .019 nozzles are .002268 sq inches
Joe
Without Data, you’re just another guy with an opinion.
|
|
|
Re: mechanical fuel inj. nozzles
[Re: merpar]
#2649272
04/26/19 12:46 PM
04/26/19 12:46 PM
|
Joined: Jan 2010
Posts: 588 Franklin, TN
23T Hemmee
mopar
|
mopar
Joined: Jan 2010
Posts: 588
Franklin, TN
|
Assuming you've got a 3-way mechanical fuel shut-off, start it and immediately start pulling back on the shut-off slowly bypassing fuel back to the tank. Idle will increase and temp will too, so don't pull back too far, but 15-20 seconds or so should clean out most gunk buildup, Definitely a trial and error method, better to lean too slowly than too quickly.
BTW the crystals form in old alky, top lube won't help there
Last edited by 23T Hemmee; 04/26/19 12:50 PM.
|
|
|
Re: Milodon
[Re: 19581021 7132]
#2667184
06/18/19 01:07 PM
06/18/19 01:07 PM
|
Joined: Jan 2010
Posts: 588 Franklin, TN
23T Hemmee
mopar
|
mopar
Joined: Jan 2010
Posts: 588
Franklin, TN
|
No, sorry, sold the last sleeve, stud, etc. everything I could salvage to a member on here, Oyvind Mopar, several years ago. Havn't seen him post in a long time, don't know if he ever got it together or not, or if he is still on here.
|
|
|
|
|