Re: Starting to work on the Duster
[Re: AndyF]
#2616035
02/02/19 05:02 PM
02/02/19 05:02 PM
|
Joined: Nov 2004
Posts: 3,517 pacific northwest
Stroker Scamp
master
|
master
Joined: Nov 2004
Posts: 3,517
pacific northwest
|
The radiator is back from the radiator shop and is ready to go. I have it mocked up now with a factory 20 inch fan and fan clutch. I have about an inch of clearance between the front of clutch and the radiator core so I'll probably order a shorter clutch from Hayden. I might also drop down to a 19 inch fan just for some extra clearance around the shroud. Other than that I think it is a go. Where did you locate the fan shroud?
footbrake N/A SB 408 Scamp 10.10 @ 132 street/strip 73 Duster 340 street strip 12.79 @ 105
|
|
|
Re: Starting to work on the Duster
[Re: Stroker Scamp]
#2616110
02/02/19 07:27 PM
02/02/19 07:27 PM
|
Joined: Jan 2003
Posts: 31,052 Oregon
AndyF
OP
I Win
|
OP
I Win
Joined: Jan 2003
Posts: 31,052
Oregon
|
The radiator is back from the radiator shop and is ready to go. I have it mocked up now with a factory 20 inch fan and fan clutch. I have about an inch of clearance between the front of clutch and the radiator core so I'll probably order a shorter clutch from Hayden. I might also drop down to a 19 inch fan just for some extra clearance around the shroud. Other than that I think it is a go. Where did you locate the fan shroud? That is a factory Cordoba fan shroud mounted on a Cordoba radiator. All stock stuff.
|
|
|
Re: Starting to work on the Duster
[Re: AndyF]
#2616340
02/03/19 10:41 AM
02/03/19 10:41 AM
|
Joined: Sep 2007
Posts: 258 Stockholm, Sweden
TomsCharger70
enthusiast
|
enthusiast
Joined: Sep 2007
Posts: 258
Stockholm, Sweden
|
I have the kits in stock but I haven't printed out instructions yet or updated the website. Never used a CVR electric water pump but it should fit if the electric motor isn't too big. Thanks Andy for your reply! I will be checking out your web page when you start selling these.. or will you sell them through Mancini and/or Hughes? Thanks again! /Tom
|
|
|
Re: Starting to work on the Duster
[Re: ZIPPY]
#2617510
02/05/19 10:17 PM
02/05/19 10:17 PM
|
Joined: Oct 2012
Posts: 91 Calgary, AB
64Bel
member
|
member
Joined: Oct 2012
Posts: 91
Calgary, AB
|
Good stuff, keep the content rolling...
I like the effect on the background, and am starting to see what you were talking about re: the F settings on the other thread. FYI that effect is referred to as Bokeh.
|
|
|
Re: Starting to work on the Duster
[Re: AndyF]
#2617514
02/05/19 10:20 PM
02/05/19 10:20 PM
|
Joined: May 2008
Posts: 1,131 Thigh-Gap Junction
@#$%&*!
New user name, Same old jerk!
|
New user name, Same old jerk!
Joined: May 2008
Posts: 1,131
Thigh-Gap Junction
|
I built an aluminum panel for the Pro Dash. I'll get this mounted up in the car and see how it looks. Can you start the coffee pot with that thing? Does it get Gmail?
|
|
|
Re: Starting to work on the Duster
[Re: 64Bel]
#2617578
02/06/19 12:04 AM
02/06/19 12:04 AM
|
Joined: Jan 2003
Posts: 17,892 S.E. Michigan
ZIPPY
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 17,892
S.E. Michigan
|
Good stuff, keep the content rolling...
I like the effect on the background, and am starting to see what you were talking about re: the F settings on the other thread. FYI that effect is referred to as Bokeh. Thank you. Good reading. I should probably take a class or something but sometimes it's more fun to pick things up here and there.
|
|
|
Re: Starting to work on the Duster
[Re: ZIPPY]
#2617746
02/06/19 12:27 PM
02/06/19 12:27 PM
|
Joined: Feb 2004
Posts: 34,934 S.E. South Dakota !
bigdad
Still Posting A Lot
|
Still Posting A Lot
Joined: Feb 2004
Posts: 34,934
S.E. South Dakota !
|
where did you purchase the chin spoiler from ?
The lips of fools bring them strife, and their mouths invite a beating.Proverbs 18:6
|
|
|
Re: Starting to work on the Duster
[Re: AndyF]
#2617922
02/06/19 05:37 PM
02/06/19 05:37 PM
|
Joined: Feb 2004
Posts: 34,934 S.E. South Dakota !
bigdad
Still Posting A Lot
|
Still Posting A Lot
Joined: Feb 2004
Posts: 34,934
S.E. South Dakota !
|
I think I could maybe make that fit under my car , with some work
The lips of fools bring them strife, and their mouths invite a beating.Proverbs 18:6
|
|
|
Re: Starting to work on the Duster
[Re: bigdad]
#2617925
02/06/19 05:56 PM
02/06/19 05:56 PM
|
Joined: Jan 2003
Posts: 10,040 MN
JERICOGTX
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,040
MN
|
I think I could maybe make that fit under my car , with some work
They make one for a Road Runner, that might work better.
69 GTX
68 Road Runner
|
|
|
Re: Starting to work on the Duster
[Re: AndyF]
#2617931
02/06/19 06:05 PM
02/06/19 06:05 PM
|
Joined: Jan 2003
Posts: 10,040 MN
JERICOGTX
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,040
MN
|
Why? Should be the same width.
69 GTX
68 Road Runner
|
|
|
Re: Starting to work on the Duster
[Re: AndyF]
#2617935
02/06/19 06:13 PM
02/06/19 06:13 PM
|
Joined: Feb 2004
Posts: 34,934 S.E. South Dakota !
bigdad
Still Posting A Lot
|
Still Posting A Lot
Joined: Feb 2004
Posts: 34,934
S.E. South Dakota !
|
shaped like a RR bumper --not straight
The lips of fools bring them strife, and their mouths invite a beating.Proverbs 18:6
|
|
|
Re: Starting to work on the Duster
[Re: bigdad]
#2618869
02/08/19 10:48 PM
02/08/19 10:48 PM
|
Joined: Aug 2003
Posts: 4,689 On the parachute mount
n20mstr
master
|
master
Joined: Aug 2003
Posts: 4,689
On the parachute mount
|
I think I could maybe make that fit under my car , with some work
Look at the recent pic of my car in the random mopar race car thread. Page 25 , It's got a 79 Malibu chin spoiler. I did some fab work, but it fits and looks nice
Last edited by n20mstr; 02/08/19 10:55 PM.
....BAD A$$ STREET CAR.....
|
|
|
Re: Starting to work on the Duster
[Re: AndyF]
#2628939
03/05/19 12:27 AM
03/05/19 12:27 AM
|
Joined: Feb 2004
Posts: 855 ontario canada kingston
aspenrt360
super stock
|
super stock
Joined: Feb 2004
Posts: 855
ontario canada kingston
|
Really like this project! nice work!
2013 Chrysler 300 touring 1974 Dodge Charger SE. 360-727-8.75-3.23 sure grip 1972 Dodge Dart Swinger 1995 Dodge Ram 1500 4x4
|
|
|
|
|