A body disc brake conversion issue - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer A body disc brake conversion issue

Print Thread

Page 2 of 2

1

2

Re: A body disc brake conversion issue [Re: RapidRobert] #2492488 05/05/18 05:10 PM 05/05/18 05:10 PM
Joined: Feb 2005 Posts: 957 MI, Lapeer M maximus OP super stock
maximus OP super stock M Joined: Feb 2005 Posts: 957 MI, Lapeer	I did pull the mc apart. Cleaned it out and reassembled it yesterday.That's why I eliminated that as a problem.

Re: A body disc brake conversion issue [Re: maximus] #2492825 05/06/18 03:55 PM 05/06/18 03:55 PM
Joined: Jan 2003 Posts: 25,933 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,933 Rio Linda, CA	Originally Posted By maximus I now took apart master cylinder. Question should all 4 seals face forward? The second one on the front piston is facing rearward, that is for the rear of the car. In normal operation the rear piston pushes the front piston hydraulically, that's why the rear seal on the front piston faces aft to face the pressure from the rear piston. Only during a system failure does the rear piston physically contact the front piston. The INTERNET, the MISinformation superhighway

Re: A body disc brake conversion issue [Re: John_Kunkel] #2492837 05/06/18 04:45 PM 05/06/18 04:45 PM
Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska	John you're the man! live every 24 hour block of time like it's your last day on earth

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1