Question On Oiling - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Question On Oiling

Print Thread

Question On Oiling #2422849 12/23/17 10:19 PM 12/23/17 10:19 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY OP Master
MR_P_BODY OP Master Joined: Jun 2003 Posts: 52,972 Romeo MI	I'm looking for a set of SB flat tappet lifters with push rod oiling.. I see that Comp Cams has a 2901-16 solid but I am wondering if it works with push rod oiling.. I'm new to this NON roller stuff.. last time I used a flat tappet cam was in the early 70s... thanks for the help

Re: Question On Oiling [Re: MR_P_BODY] #2422883 12/23/17 11:23 PM 12/23/17 11:23 PM
Joined: Jan 2007 Posts: 8,034 Mt Morris Michigan mopar dave master
mopar dave master Joined: Jan 2007 Posts: 8,034 Mt Morris Michigan	AMC lifters are the ones that oil thru the lifter/pushrod. http://www.youtube.com/watch?v=aIxaesJ190U http://youtu.be/lCZAaN7fFLg

Re: Question On Oiling [Re: mopar dave] #2422899 12/23/17 11:51 PM 12/23/17 11:51 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY OP Master
MR_P_BODY OP Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Originally Posted By mopar dave AMC lifters are the ones that oil thru the lifter/pushrod. I see that.. I found out that I want CC 801-16 thanks

Re: Question On Oiling [Re: MR_P_BODY] #2422912 12/24/17 12:14 AM 12/24/17 12:14 AM
Joined: Jan 2003 Posts: 9,826 las vegas 70AARcuda master
70AARcuda master Joined: Jan 2003 Posts: 9,826 las vegas	Be aware that the pushrod seat of the AMC lifters is higher then the mopar lifter.... Tony 70 AARCuda Vitamin C 71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield) 71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas) 71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)

Re: Question On Oiling [Re: 70AARcuda] #2422916 12/24/17 12:17 AM 12/24/17 12:17 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY OP Master
MR_P_BODY OP Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Originally Posted By 70AARcuda Be aware that the pushrod seat of the AMC lifters is higher then the mopar lifter.... Does it still oil the push rods.. thanks

Re: Question On Oiling [Re: MR_P_BODY] #2423039 12/24/17 11:50 AM 12/24/17 11:50 AM
Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska	The CC site says yes they both oil & 1.79" seat hite on the Mopar/AMC one & 1.63" on the std SB Mopar one. If they are the same ex for the hite (at least from the descrip it sounds like they are) then I would mockup with a junk lifter with the cup at those heights (I JB welded a hyd one for checking) & Hughes offers an adjustable one for checking (He may rent it out) & see which one gives the best valvetrain geometry. EDIT & I set (JBweld) the cup hite at whatever preload my setup has during mockup, maybe a bit OCD there but its my meticulousness Last edited by RapidRobert; 12/26/17 01:10 PM. Reason: missed something live every 24 hour block of time like it's your last day on earth

Re: Question On Oiling [Re: MR_P_BODY] #2423331 12/24/17 10:47 PM 12/24/17 10:47 PM
Joined: May 2012 Posts: 72 sioux falls, sd 1 10sec.dart member
10sec.dart member 1 Joined: May 2012 Posts: 72 sioux falls, sd	Check out the lifters on Hughes web site, they are oil through,plus they have the edm hole, they were the ones I was going to run with my w9's, but I went 48' roller Last edited by 10sec.dart; 12/24/17 10:47 PM.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1