Need measurements-69 Charger console brackets - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Need measurements-69 Charger console brackets

Print Thread

Need measurements-69 Charger console brackets #2402543 11/12/17 03:03 PM 11/12/17 03:03 PM
Joined: Jan 2003 Posts: 1,141 NH N NHCharger OP super stock
NHCharger OP super stock N Joined: Jan 2003 Posts: 1,141 NH	I am swapping my Charger from column shift to console. I picked up a used console and brackets at Carlisle. If someone has a project car and could give me some measurements for the three brackets that would be My Dad always told me, when setting goals " avoid disappointment, aim low".

Re: Need measurements-69 Charger console brackets [Re: NHCharger] #2403270 11/13/17 10:45 PM 11/13/17 10:45 PM
Joined: Feb 2012 Posts: 4,454 Morristown Tn. 7 71birdJ68 master
71birdJ68 master 7 Joined: Feb 2012 Posts: 4,454 Morristown Tn.	Nobody chimed in, so I'll give it a try. I installed a console on my non console RR, basically things will lay were they want to. Put the brackets on the console and with trial and error move the console around till it feels, and looks right, then mark where the brackets go.

Re: Need measurements-69 Charger console brackets [Re: 71birdJ68] #2403342 11/14/17 12:57 AM 11/14/17 12:57 AM
Joined: May 2004 Posts: 137 MN 5 58pwrwgn member
58pwrwgn member 5 Joined: May 2004 Posts: 137 MN	I measured my 69. The first bracket is 4 3/16 from the seam. The second bracket is 19 1/8 from the seam. Both are to the left of the tunnel center.

Re: Need measurements-69 Charger console brackets [Re: 58pwrwgn] #2403652 11/14/17 07:43 PM 11/14/17 07:43 PM
Joined: Jan 2003 Posts: 1,141 NH N NHCharger OP super stock
NHCharger OP super stock N Joined: Jan 2003 Posts: 1,141 NH	Thanks for the info. My Dad always told me, when setting goals " avoid disappointment, aim low".

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1