Posted By: NHCharger
Need measurements-69 Charger console brackets - 11/12/17 07:03 PM
I am swapping my Charger from column shift to console. I picked up a used console and brackets at Carlisle.
If someone has a project car and could give me some measurements for the three brackets that would be
Posted By: 71birdJ68
Re: Need measurements-69 Charger console brackets - 11/14/17 02:45 AM
Nobody chimed in, so I'll give it a try. I installed a console on my non console RR, basically things will lay were they want to. Put the brackets on the console and with trial and error move the console around till it feels, and looks right, then mark where the brackets go.
Posted By: 58pwrwgn
Re: Need measurements-69 Charger console brackets - 11/14/17 04:57 AM
I measured my 69. The first bracket is 4 3/16 from the seam. The second bracket is 19 1/8 from the seam. Both are to the left of the tunnel center.