Page 3 of 4 < 1 2 3 4 >
Topic Options
#2374190 - 09/20/17 08:53 PM Re: Bracket Gen 3 Build [Re: sixpackgut]
sixpackgut Offline
Drag Week Mod Champion

Registered: 06/08/03
Posts: 9005
Loc: Charleston
shruggy


Attachments
17545251_1789369974410356_3367040537008216714_o.jpg


_________________________
Gen 3 power 6.22@110, 9.85@135

performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Top
#2374281 - 09/20/17 10:45 PM Re: Bracket Gen 3 Build [Re: sixpackgut]
408strokerdart Offline
master

Registered: 02/03/03
Posts: 3440
Loc: Out West
Originally Posted By sixpackgut
I dont believe you can shorten the runners. The setion between the runner where you would shorten it is hollow for the idle circuit maybe. Not sure about that

Brain, i have a friend. Get me the holley part #s and Ill get you prices. There are 2 prices, on your own or you can call with questions as much as you want


I will send you the parts list I got from the Holley guy. Give me a good email address again....

And thanks! I checked prices from Jegs and can save a little with my Pro discount, but it is still enough to make you faint.
_________________________

5.35 @ 128 1/8th, new 572" bullet on methanol just waiting to get a new best...

Top
#2374380 - 09/21/17 08:05 AM Re: Bracket Gen 3 Build [Re: sixpackgut]
ric3xrt Offline
super stock

Registered: 01/13/06
Posts: 776
Loc: Sellersville Pa
Originally Posted By sixpackgut
I dont believe you can shorten the runners. The setion between the runner where you would shorten it is hollow for the idle circuit maybe. Not sure about that



The one that came with some other 6.1 parts, was cut down the middle length wise. and everything you see in this photo that would be under the base plate was removed.

I'll see if I can get the manifold back so I can take some photos of it.


Attachments
Sixpackgut 6.1.jpg



Top
#2374382 - 09/21/17 08:06 AM Re: Bracket Gen 3 Build [Re: 408strokerdart]
ric3xrt Offline
super stock

Registered: 01/13/06
Posts: 776
Loc: Sellersville Pa
yes this is your photo.....(I didn't have a6.1 photo on this computer)

Top
#2374624 - 09/21/17 03:35 PM Re: Bracket Gen 3 Build [Re: 408strokerdart]
72Swinger Offline
master

Registered: 02/23/11
Posts: 4288
Loc: Nebraska
I think the runner length on a 6.1 intake is 9 ish inches IIRC.
_________________________
Mopar to the bone!!!

Top
#2384970 - 10/10/17 08:39 AM Re: Bracket Gen 3 Build [Re: 408strokerdart]
408strokerdart Offline
master

Registered: 02/03/03
Posts: 3440
Loc: Out West
Got my new 6.1 block, heads back from sixpakgut (Ray) and most of the other parts rounded up. The front of the intake is welded up and resurfaced for the TB adapter. Been working hard on the timing cover and making it ready for my cooling system. Also found a machine shop in the DFW are that has a torque plate for this thing so I won't have to buy one. Should be screwing this thing together in about 4 weeks (lead time on pistons). Pics to come when I put it together.
_________________________

5.35 @ 128 1/8th, new 572" bullet on methanol just waiting to get a new best...

Top
#2385001 - 10/10/17 09:42 AM Re: Bracket Gen 3 Build [Re: 408strokerdart]
Quickrunner Offline
mopar

Registered: 03/10/10
Posts: 462
Loc: Indianapolis In. usa
Looking forward to seeing this come together.
_________________________
05 Ram 1500 Daytona package
71 Demon Gen3 hemi drag radial project
2004 Jeep Liberty
09 Challenger R/T 6spd

Missin' my 9 second 70 runner!

Top
#2398408 - 11/04/17 01:10 PM Re: Bracket Gen 3 Build [Re: Quickrunner]
cudaragtop Online   content
member

Registered: 06/29/13
Posts: 7
Loc: Washington State
Following.
_________________________
1 of 88 340 4-Speed 'Cuda Convertibles Built in 1970

Top
#2402596 - 11/12/17 01:30 PM Re: Bracket Gen 3 Build [Re: 408strokerdart]
moparmitch Offline
member

Registered: 02/16/10
Posts: 86
Loc: Michigan
Have any new progress to report?

Top
#2404488 - 11/16/17 11:21 AM Re: Bracket Gen 3 Build [Re: 408strokerdart]
408strokerdart Offline
master

Registered: 02/03/03
Posts: 3440
Loc: Out West
Heads are done and assembled. I didn't like the stock valve job so we did a nice 5 angle job that picked up a few numbers on the flow. Also took a small surface pass to make a better finish to seal the deck. Set-up new springs and cleaned up.

Molnar crank and rods have arrived as well as the bearings. Custom Diamond pistons have arrived yesterday so the rotating assembly will be balanced on Friday (tomorrow).

Block work is just waiting on my new torque plate to arrive. (anyone building a gen 3 in DFW can "rent" my torque plate if they have the work done by Wells Racing Engines).

My timing cover will be done this weekend. Motor plate template is finished.

New custom Innovators West balancer is on order.

6.1 Intake has been extensively modified by me. Custom 3d printed adapter for the Holley Sniper LS throttle body to intake is in process.

Lots happening on this build. Should be putting everything together starting early to mid December.
_________________________

5.35 @ 128 1/8th, new 572" bullet on methanol just waiting to get a new best...

Top
#2404492 - 11/16/17 11:39 AM Re: Bracket Gen 3 Build [Re: 408strokerdart]
pittsburghracer Offline
Slowride

Registered: 02/02/05
Posts: 11980
Loc: PA.
I for one can not wait to see what one of these suckers can do in a car like your’s. Counting down the days. Very nice quality build
_________________________
1970 Duster
Edelbrock headed 408
6.143@110.89 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block
6.001@113.27mph
9.44@138.23


Untitled by John Cadamore, on Flickr





Top
#2404493 - 11/16/17 11:40 AM Re: Bracket Gen 3 Build [Re: 408strokerdart]
sixpackgut Offline
Drag Week Mod Champion

Registered: 06/08/03
Posts: 9005
Loc: Charleston
Pics would be nice
_________________________
Gen 3 power 6.22@110, 9.85@135

performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Top
#2404495 - 11/16/17 11:45 AM Re: Bracket Gen 3 Build [Re: pittsburghracer]
sixpackgut Offline
Drag Week Mod Champion

Registered: 06/08/03
Posts: 9005
Loc: Charleston
Originally Posted By pittsburghracer
I for one can not wait to see what one of these suckers can do in a car like your’s.


With a flat hood hammer
_________________________
Gen 3 power 6.22@110, 9.85@135

performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Top
#2404645 - 11/16/17 07:16 PM Re: Bracket Gen 3 Build [Re: sixpackgut]
408strokerdart Offline
master

Registered: 02/03/03
Posts: 3440
Loc: Out West
Originally Posted By sixpackgut
Originally Posted By pittsburghracer
I for one can not wait to see what one of these suckers can do in a car like your’s.


With a flat hood hammer


Yes, under a flat hood.
_________________________

5.35 @ 128 1/8th, new 572" bullet on methanol just waiting to get a new best...

Top
#2404646 - 11/16/17 07:17 PM Re: Bracket Gen 3 Build [Re: sixpackgut]
408strokerdart Offline
master

Registered: 02/03/03
Posts: 3440
Loc: Out West
Originally Posted By sixpackgut
Pics would be nice


Posting from my desktop at work. No picture hosting sites are work approved.
_________________________

5.35 @ 128 1/8th, new 572" bullet on methanol just waiting to get a new best...

Top
#2405098 - 11/17/17 03:04 PM Re: Bracket Gen 3 Build [Re: 408strokerdart]
408strokerdart Offline
master

Registered: 02/03/03
Posts: 3440
Loc: Out West


Edited by 408strokerdart (11/18/17 07:05 PM)
_________________________

5.35 @ 128 1/8th, new 572" bullet on methanol just waiting to get a new best...

Top
#2405205 - 11/17/17 07:28 PM Re: Bracket Gen 3 Build [Re: 408strokerdart]
pittsburghracer Offline
Slowride

Registered: 02/02/05
Posts: 11980
Loc: PA.
What the heck. That website asked if I was over 18 so I closed it out.
_________________________
1970 Duster
Edelbrock headed 408
6.143@110.89 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block
6.001@113.27mph
9.44@138.23


Untitled by John Cadamore, on Flickr





Top
#2405674 - 11/18/17 07:06 PM Re: Bracket Gen 3 Build [Re: pittsburghracer]
408strokerdart Offline
master

Registered: 02/03/03
Posts: 3440
Loc: Out West
Originally Posted By pittsburghracer
What the heck. That website asked if I was over 18 so I closed it out.


Not sure what is going on so I changed hosting site.
_________________________

5.35 @ 128 1/8th, new 572" bullet on methanol just waiting to get a new best...

Top
#2405702 - 11/18/17 08:06 PM Re: Bracket Gen 3 Build [Re: 408strokerdart]
sixpackgut Offline
Drag Week Mod Champion

Registered: 06/08/03
Posts: 9005
Loc: Charleston
Brian's pics


Attachments
received_10215150317060534.jpeg

received_10215150314380467.jpeg


_________________________
Gen 3 power 6.22@110, 9.85@135

performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Top
#2405847 - 11/19/17 07:04 AM Re: Bracket Gen 3 Build [Re: 408strokerdart]
ric3xrt Offline
super stock

Registered: 01/13/06
Posts: 776
Loc: Sellersville Pa
That ridge, have you found it works on the Eagle or 6.1 heads also?

Top
Page 3 of 4 < 1 2 3 4 >

Advertisement
Sponsored Link
Forum Stats
25,004 Registered Members
32 Forums
185,377 Topics
2,148,071 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Dry sump vs wet: School me
by herkamer
12/17/17 05:56 PM
What happens if you take an old piece of copper pipe...
by feets
12/17/17 05:36 PM
69 charger with vette chassis. $10k
by NTOLERANCE
12/17/17 05:23 PM
3 point mirrors on a 72, one mounting point above wing glass
by grancuda
12/17/17 05:22 PM