Previous Thread
Next Thread
Print Thread
Page 3 of 4 1 2 3 4
Re: Bracket Gen 3 Build [Re: sixpackgut] #2374190
09/20/17 10:53 PM
09/20/17 10:53 PM
Joined: Jun 2003
Posts: 9,225
Charleston
S
sixpackgut Offline
Drag Week Mod Champion
sixpackgut  Offline
Drag Week Mod Champion
S

Joined: Jun 2003
Posts: 9,225
Charleston
shruggy

17545251_1789369974410356_3367040537008216714_o.jpg

Gen 3 power 6.22@110, 9.85@135
Follow @g3hemiswap on instagram

performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs
Re: Bracket Gen 3 Build [Re: sixpackgut] #2374281
09/21/17 12:45 AM
09/21/17 12:45 AM
Joined: Feb 2003
Posts: 3,456
Out West
4
408strokerdart Offline OP
master
408strokerdart  Offline OP
master
4

Joined: Feb 2003
Posts: 3,456
Out West
Originally Posted By sixpackgut
I dont believe you can shorten the runners. The setion between the runner where you would shorten it is hollow for the idle circuit maybe. Not sure about that

Brain, i have a friend. Get me the holley part #s and Ill get you prices. There are 2 prices, on your own or you can call with questions as much as you want


I will send you the parts list I got from the Holley guy. Give me a good email address again....

And thanks! I checked prices from Jegs and can save a little with my Pro discount, but it is still enough to make you faint.

Re: Bracket Gen 3 Build [Re: sixpackgut] #2374380
09/21/17 10:05 AM
09/21/17 10:05 AM
Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
ric3xrt Offline
pro stock
ric3xrt  Offline
pro stock

Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
Originally Posted By sixpackgut
I dont believe you can shorten the runners. The setion between the runner where you would shorten it is hollow for the idle circuit maybe. Not sure about that



The one that came with some other 6.1 parts, was cut down the middle length wise. and everything you see in this photo that would be under the base plate was removed.

I'll see if I can get the manifold back so I can take some photos of it.

Sixpackgut 6.1.jpg
Re: Bracket Gen 3 Build [Re: 408strokerdart] #2374382
09/21/17 10:06 AM
09/21/17 10:06 AM
Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
ric3xrt Offline
pro stock
ric3xrt  Offline
pro stock

Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
yes this is your photo.....(I didn't have a6.1 photo on this computer)

Re: Bracket Gen 3 Build [Re: 408strokerdart] #2374624
09/21/17 05:35 PM
09/21/17 05:35 PM
Joined: Feb 2011
Posts: 4,302
Nebraska
72Swinger Offline
master
72Swinger  Offline
master

Joined: Feb 2011
Posts: 4,302
Nebraska
I think the runner length on a 6.1 intake is 9 ish inches IIRC.


Mopar to the bone!!!
Re: Bracket Gen 3 Build [Re: 408strokerdart] #2384970
10/10/17 10:39 AM
10/10/17 10:39 AM
Joined: Feb 2003
Posts: 3,456
Out West
4
408strokerdart Offline OP
master
408strokerdart  Offline OP
master
4

Joined: Feb 2003
Posts: 3,456
Out West
Got my new 6.1 block, heads back from sixpakgut (Ray) and most of the other parts rounded up. The front of the intake is welded up and resurfaced for the TB adapter. Been working hard on the timing cover and making it ready for my cooling system. Also found a machine shop in the DFW are that has a torque plate for this thing so I won't have to buy one. Should be screwing this thing together in about 4 weeks (lead time on pistons). Pics to come when I put it together.

Re: Bracket Gen 3 Build [Re: 408strokerdart] #2385001
10/10/17 11:42 AM
10/10/17 11:42 AM
Joined: Mar 2010
Posts: 625
Indianapolis In. usa
Quickrunner Offline
mopar
Quickrunner  Offline
mopar

Joined: Mar 2010
Posts: 625
Indianapolis In. usa
Looking forward to seeing this come together.


05 Ram 1500 Daytona package
71 Demon Gen3 hemi drag radial project



Missin' my 9 second 70 runner!
Re: Bracket Gen 3 Build [Re: Quickrunner] #2398408
11/04/17 03:10 PM
11/04/17 03:10 PM
Joined: Jun 2013
Posts: 7
Washington State
cudaragtop Offline
member
cudaragtop  Offline
member

Joined: Jun 2013
Posts: 7
Washington State
Following.

Re: Bracket Gen 3 Build [Re: 408strokerdart] #2402596
11/12/17 04:30 PM
11/12/17 04:30 PM
Joined: Feb 2010
Posts: 153
MI, USA
M
moparmitch Offline
member
moparmitch  Offline
member
M

Joined: Feb 2010
Posts: 153
MI, USA
Have any new progress to report?

Re: Bracket Gen 3 Build [Re: 408strokerdart] #2404488
11/16/17 02:21 PM
11/16/17 02:21 PM
Joined: Feb 2003
Posts: 3,456
Out West
4
408strokerdart Offline OP
master
408strokerdart  Offline OP
master
4

Joined: Feb 2003
Posts: 3,456
Out West
Heads are done and assembled. I didn't like the stock valve job so we did a nice 5 angle job that picked up a few numbers on the flow. Also took a small surface pass to make a better finish to seal the deck. Set-up new springs and cleaned up.

Molnar crank and rods have arrived as well as the bearings. Custom Diamond pistons have arrived yesterday so the rotating assembly will be balanced on Friday (tomorrow).

Block work is just waiting on my new torque plate to arrive. (anyone building a gen 3 in DFW can "rent" my torque plate if they have the work done by Wells Racing Engines).

My timing cover will be done this weekend. Motor plate template is finished.

New custom Innovators West balancer is on order.

6.1 Intake has been extensively modified by me. Custom 3d printed adapter for the Holley Sniper LS throttle body to intake is in process.

Lots happening on this build. Should be putting everything together starting early to mid December.

Re: Bracket Gen 3 Build [Re: 408strokerdart] #2404492
11/16/17 02:39 PM
11/16/17 02:39 PM
Joined: Feb 2005
Posts: 20,111
PA.
pittsburghracer Offline
"Little"John
pittsburghracer  Offline
"Little"John

Joined: Feb 2005
Posts: 20,111
PA.
I for one can not wait to see what one of these suckers can do in a car like your’s. Counting down the days. Very nice quality build


1970 Duster
Edelbrock headed 408
5.984@112.52
422 Indy headed small block
5.982@112.56 mph
9.42@138.27

Livin and lovin life one day at a time




Re: Bracket Gen 3 Build [Re: 408strokerdart] #2404493
11/16/17 02:40 PM
11/16/17 02:40 PM
Joined: Jun 2003
Posts: 9,225
Charleston
S
sixpackgut Offline
Drag Week Mod Champion
sixpackgut  Offline
Drag Week Mod Champion
S

Joined: Jun 2003
Posts: 9,225
Charleston
Pics would be nice


Gen 3 power 6.22@110, 9.85@135
Follow @g3hemiswap on instagram

performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs
Re: Bracket Gen 3 Build [Re: pittsburghracer] #2404495
11/16/17 02:45 PM
11/16/17 02:45 PM
Joined: Jun 2003
Posts: 9,225
Charleston
S
sixpackgut Offline
Drag Week Mod Champion
sixpackgut  Offline
Drag Week Mod Champion
S

Joined: Jun 2003
Posts: 9,225
Charleston
Originally Posted By pittsburghracer
I for one can not wait to see what one of these suckers can do in a car like your’s.


With a flat hood hammer


Gen 3 power 6.22@110, 9.85@135
Follow @g3hemiswap on instagram

performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs
Re: Bracket Gen 3 Build [Re: sixpackgut] #2404645
11/16/17 10:16 PM
11/16/17 10:16 PM
Joined: Feb 2003
Posts: 3,456
Out West
4
408strokerdart Offline OP
master
408strokerdart  Offline OP
master
4

Joined: Feb 2003
Posts: 3,456
Out West
Originally Posted By sixpackgut
Originally Posted By pittsburghracer
I for one can not wait to see what one of these suckers can do in a car like your’s.


With a flat hood hammer


Yes, under a flat hood.

Re: Bracket Gen 3 Build [Re: sixpackgut] #2404646
11/16/17 10:17 PM
11/16/17 10:17 PM
Joined: Feb 2003
Posts: 3,456
Out West
4
408strokerdart Offline OP
master
408strokerdart  Offline OP
master
4

Joined: Feb 2003
Posts: 3,456
Out West
Originally Posted By sixpackgut
Pics would be nice


Posting from my desktop at work. No picture hosting sites are work approved.

Re: Bracket Gen 3 Build [Re: 408strokerdart] #2405098
11/17/17 06:04 PM
11/17/17 06:04 PM
Joined: Feb 2003
Posts: 3,456
Out West
4
408strokerdart Offline OP
master
408strokerdart  Offline OP
master
4

Joined: Feb 2003
Posts: 3,456
Out West

Last edited by 408strokerdart; 11/18/17 10:05 PM.
Re: Bracket Gen 3 Build [Re: 408strokerdart] #2405205
11/17/17 10:28 PM
11/17/17 10:28 PM
Joined: Feb 2005
Posts: 20,111
PA.
pittsburghracer Offline
"Little"John
pittsburghracer  Offline
"Little"John

Joined: Feb 2005
Posts: 20,111
PA.
What the heck. That website asked if I was over 18 so I closed it out.


1970 Duster
Edelbrock headed 408
5.984@112.52
422 Indy headed small block
5.982@112.56 mph
9.42@138.27

Livin and lovin life one day at a time




Re: Bracket Gen 3 Build [Re: pittsburghracer] #2405674
11/18/17 10:06 PM
11/18/17 10:06 PM
Joined: Feb 2003
Posts: 3,456
Out West
4
408strokerdart Offline OP
master
408strokerdart  Offline OP
master
4

Joined: Feb 2003
Posts: 3,456
Out West
Originally Posted By pittsburghracer
What the heck. That website asked if I was over 18 so I closed it out.


Not sure what is going on so I changed hosting site.

Re: Bracket Gen 3 Build [Re: 408strokerdart] #2405702
11/18/17 11:06 PM
11/18/17 11:06 PM
Joined: Jun 2003
Posts: 9,225
Charleston
S
sixpackgut Offline
Drag Week Mod Champion
sixpackgut  Offline
Drag Week Mod Champion
S

Joined: Jun 2003
Posts: 9,225
Charleston
Brian's pics

received_10215150317060534.jpegreceived_10215150314380467.jpeg

Gen 3 power 6.22@110, 9.85@135
Follow @g3hemiswap on instagram

performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs
Re: Bracket Gen 3 Build [Re: 408strokerdart] #2405847
11/19/17 10:04 AM
11/19/17 10:04 AM
Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
ric3xrt Offline
pro stock
ric3xrt  Offline
pro stock

Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
That ridge, have you found it works on the Eagle or 6.1 heads also?

Page 3 of 4 1 2 3 4






Powered by UBB.threads™ PHP Forum Software 7.7.1