BigBlockBryan,

I have the part that allows for use of a 130T flywheel, it is the part in your pic on the right.

If you want it, you can have it, just pay for the shipping...your call/

I do not have the nose cone piece, as I have that installed in my Lakewood bell. the nose locator is used for both the 130 and 143 flywheels.

Regards, Mark

yea i just picked up a cast iron bell of ebay thats for a 10.5 clutch just gonna get this thing on the road sick of not driving my car

is THIS it?



were all smallblock flywheels 130 tooth?

If so I only need the nose cone piece.

If not I need this: Lakewood adapter kit

And PERFECT timing as I have had the Lakewood and Center force forever but just broke a clutch spring on the stock unit yesterday

Thanks for any help

You'll be sicker and not driving longer if your right foot is missing... depending on how strong your engine is (and how many RPM you turn it), the scattershield is never a bad idea.

Bump

by the time you buy the other parts you need to install the 833 without all it's bolts you could just pony up for the right bellhousing

Yes all smallblocks were only 130tooth.

If that is a smallblock bellhousing you shouldn't need that .

Running up your post count about sums it up. Late to the party as usual ... all his issues have been addressed.

What exactly does that little tab with the stepped stud on it do?

We have one of the Lakewood bell housings we use on the dyno, and I thought the one starter bolt hole for the 130T flywheel was just drilled in the wrong place.

For the dyno, it's not really a big deal. The upper bolt fits okay, and on the bottom one I just use a c clamp.

This will explain and show it:

http://www.jegs.com/InstallationInstructions/600/620/620-15905.pdf

Got it ........ Thanks.

If you pull your head out of your backside long enough to see what was actually going on in the world around you you'd realize to whom I was responding to ...

UCUDANT asked twice about this part, and flywheel tooth count near the end of this thread and no one had responded to his 2 requests for info.

but thanks for playing ...