|
Re: CLEAR THE AIR ON SB HEAD CHOICE
[Re: Silver68RT]
#2277080
03/27/17 12:10 PM
03/27/17 12:10 PM
|
Joined: Oct 2011
Posts: 3,036 bean town ....Ca
WHITEDART
master
|
master
Joined: Oct 2011
Posts: 3,036
bean town ....Ca
|
Anyone know what the intake port volume is on a W9 or a W9RP, or what the range is with CNC ported ones? Just curious how it compares to the Indy 360-1. I believe 260cc to 350cc depending on who does the work.. and can flow close to a 100 more CFM than any 360 - 1
In the 8s N/A.with Brett miller W8's 5.07 at 133 at 2700lb
|
|
|
Re: CLEAR THE AIR ON SB HEAD CHOICE
[Re: pittsburghracer]
#2282307
04/04/17 04:29 PM
04/04/17 04:29 PM
|
Joined: Aug 2003
Posts: 3,245 Between a rock & a hard place
cudadoug
master
|
master
Joined: Aug 2003
Posts: 3,245
Between a rock & a hard place
|
From 12's to 7's in 10 days. A new Moparts record. Started out as a 2500 dollar post to a well over 15000 dollar build. LMAO. Funniest thing I have read on here in a long time! AND...hits it right on. OP was swept under the rug after the first few days. Poor guy.
Last edited by cudadoug; 04/04/17 04:29 PM.
|
|
|
Re: CLEAR THE AIR ON SB HEAD CHOICE
[Re: Silver68RT]
#2285391
04/10/17 06:11 PM
04/10/17 06:11 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Sorry, my fault.
Just bought a set of W9's and a "772" intake. Thanks for the help everyone. Probably going to take me a while to round up the rest of the pieces of the puzzle. Anyone know where I can get one of those water manifolds that all the water lines from the heads connect to? How about the plate for the valley for a tall deck block? I had to make all that stuff.. as far as I know they are not available any more
|
|
|
Re: CLEAR THE AIR ON SB HEAD CHOICE
[Re: Silver68RT]
#2285410
04/10/17 07:12 PM
04/10/17 07:12 PM
|
Joined: Oct 2003
Posts: 11,684 W. Kentucky
justinp61
I Live Here
|
I Live Here
Joined: Oct 2003
Posts: 11,684
W. Kentucky
|
Sorry, my fault.
Just bought a set of W9's and a "772" intake. Thanks for the help everyone. Probably going to take me a while to round up the rest of the pieces of the puzzle. Anyone know where I can get one of those water manifolds that all the water lines from the heads connect to? How about the plate for the valley for a tall deck block? IIRC there was one for sale in the race parts section last month.
|
|
|
Re: CLEAR THE AIR ON SB HEAD CHOICE
[Re: Silver68RT]
#2285851
04/11/17 03:00 PM
04/11/17 03:00 PM
|
Joined: Oct 2007
Posts: 3,978 Hilltown Pa
1967dartgt
master
|
master
Joined: Oct 2007
Posts: 3,978
Hilltown Pa
|
Sorry, my fault.
Just bought a set of W9's and a "772" intake. Thanks for the help everyone. Probably going to take me a while to round up the rest of the pieces of the puzzle. Anyone know where I can get one of those water manifolds that all the water lines from the heads connect to? How about the plate for the valley for a tall deck block? Jeff Allison out of Allison Motorsports in Michigan makes valley plates and water manifolds that will work with your w9s.
Brett Miller W9 cnc'd heads STR Chassis fabraction
|
|
|
Re: CLEAR THE AIR ON SB HEAD CHOICE
[Re: 1967dartgt]
#2286087
04/11/17 10:52 PM
04/11/17 10:52 PM
|
Joined: Apr 2006
Posts: 87 Michigan
Silver68RT
member
|
member
Joined: Apr 2006
Posts: 87
Michigan
|
Sorry, my fault.
Just bought a set of W9's and a "772" intake. Thanks for the help everyone. Probably going to take me a while to round up the rest of the pieces of the puzzle. Anyone know where I can get one of those water manifolds that all the water lines from the heads connect to? How about the plate for the valley for a tall deck block? Jeff Allison out of Allison Motorsports in Michigan makes valley plates and water manifolds that will work with your w9s. Thanks, I'll look him up. I'm in Michigan too.
|
|
|
|
|
|