It sure is smooth all the way down the track.

Another rear without the brace all the way to the flanges! [ Moparts Family Site - Keep it Friendly ]/


So is this rear going to bend?

That was my first thoughts when I saw the photo. Looks like Afco shocks in that image.

Leaf spring in the rear, all tube chassis up front. He went 4.311 his first hit today!

Could be a older picture, but Menscar uses Afco bodies for their custom builds.

If it is mild steel, then yes, absolutely it's going to bend right out past the pads on the ends. If it's .250 wall Moly tubing out there it MIGHT not, but I wouldn't count on it.

Since some seem to be so worried about what's under it. I will look tomorrow. I think they about 10 trailers down from us.

I asked him for some updated pics of the rear suspension, he said he would get a few.

You PA boys sure seem to be well connected with some of these fast guy crowds. Not only that, you guys are darn fast and impressive yourself with what you guys are doing with the small blocks.

Here's the 4.31 pass from today, it's at 1:28:14 in the video.

http://www.chevyhardcore.com/live-event/u-s-street-nationals-2017/

here is an 'updated' pic from 2015 "Lights Out In Georgia". Not sure what brand shocks are on it.

As of this morning........Steel split mono, Assassin bars and Menscer's new leaf spring valved shocks

Now where is the spare tire gonna go?

They just went 4.298!

you just couldn't resist

Been watching the race, it's good to see Lyle and Jason doing well with the car.

I guess Lyle is broke down at the moment. He needs a wheel for a 15" spindle. That shouldn't be hard to find. They announced over the live intercom.

They found one and were able to go across the scales

We carry a spare spindle mount with a tire already mounted up. We let them use it

GREAT job Monte. What happened to their wheel?

It rolled away

That explains everything!!