Re: Jesel adjusters for pushrod oiling vs spray bars?
[Re: Charger453]
#2106659
07/09/16 01:53 AM
07/09/16 01:53 AM
|
Joined: Jan 2003
Posts: 14,514 So. Burlington, Vt.
fast68plymouth
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,514
So. Burlington, Vt.
|
Afaik, Jesel doesn't make any specific adjuster for spray bar oiling. They pretty much assume the rockers will be pushrod oiled.
A .020 hole for each lifter/rocker would certainly be plenty of oil, especially when you consider how little oil can squeeze through the area of a proper edge orifice oiling set up.
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads
|
|
|
Re: Jesel adjusters for pushrod oiling vs spray bars?
[Re: Charger453]
#2106676
07/09/16 02:36 AM
07/09/16 02:36 AM
|
Joined: Sep 2003
Posts: 1,049 San Jose Ca.
boatracer572
super stock
|
super stock
Joined: Sep 2003
Posts: 1,049
San Jose Ca.
|
every motor I build gets a .030" restrictor in the pushrod, would get solid adjusters and be done with it..
Last edited by boatracer572; 07/09/16 02:55 AM.
|
|
|
Re: Jesel adjusters for pushrod oiling vs spray bars?
[Re: Charger453]
#2106745
07/09/16 11:18 AM
07/09/16 11:18 AM
|
Joined: Aug 2003
Posts: 43,307 Bend,OR USA
Cab_Burge
I Win
|
I Win
Joined: Aug 2003
Posts: 43,307
Bend,OR USA
|
On the paired shaft Jesel non alumimun rockers I have the adjusters are hollow also and there is no provisions to oil the shafts or valve tips other than splash oiling I think my Manton pushrods have a. 080 restrictor in them I'll check as I haven't put oil in that motor or even primed it yet I am using the Comp AMC solid roller lifters in it with one oiling hole in the lifters plugged.
Last edited by Cab_Burge; 07/09/16 11:19 AM.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|
|
|
Re: Jesel adjusters for pushrod oiling vs spray bars?
[Re: mopar dave]
#2106922
07/09/16 06:05 PM
07/09/16 06:05 PM
|
Joined: Feb 2005
Posts: 20,203 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,203
PA.
|
Not sure but maybe t&d adjusters will work. They offer both style adjuster but they are pricey as well at 14-16 dollars each. I know someone that may sell a set. LOL
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: Jesel adjusters for pushrod oiling vs spray bars?
[Re: mopar dave]
#2106992
07/09/16 09:35 PM
07/09/16 09:35 PM
|
Joined: Aug 2003
Posts: 43,307 Bend,OR USA
Cab_Burge
I Win
|
I Win
Joined: Aug 2003
Posts: 43,307
Bend,OR USA
|
Not sure but maybe t&d adjusters will work. They offer both style adjuster but they are pricey as well at 14-16 dollars each. All the good heat treated adjusters are around that price, depending on which brand and who you buy from The last set I bought for my Hughes cyro treated rockers where the same price,$13.50+ each plus shipping
Last edited by Cab_Burge; 07/10/16 03:25 AM.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|
|
|
|
|