|
Re: 440-1C
[Re: mac56]
#2093172
06/16/16 08:47 PM
06/16/16 08:47 PM
|
Joined: Jan 2003
Posts: 14,499 So. Burlington, Vt.
fast68plymouth
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,499
So. Burlington, Vt.
|
Not that I know of...... And afaik, the 440-1C's haven't been available for a couple of years.
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads
|
|
|
Re: 440-1C
[Re: mac56]
#2093387
06/17/16 09:31 AM
06/17/16 09:31 AM
|
Joined: Jan 2003
Posts: 10,000 Frostbitefalls MN (Rocky&Bullw...
gregsdart
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,000
Frostbitefalls MN (Rocky&Bullw...
|
I bet you can find a used set. They are so heavy, I am sure others who bought them then upgraded to aluminum later. DAMHIK. if you do find a set, and need 2.25 intake valves, let me know. I will let go of the seven valves I have for half of retail. Very low use, maybe 250 runs, one valve job on them.
8..603 156 mph best, 2905 lbs 549, indy 572-13, alky
|
|
|
Re: 440-1C
[Re: mac56]
#2093471
06/17/16 12:51 PM
06/17/16 12:51 PM
|
Joined: Jan 2003
Posts: 14,499 So. Burlington, Vt.
fast68plymouth
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,499
So. Burlington, Vt.
|
I tried getting a couple of sets about two years ago for some tractor pulling guys. There were none to be had, and at the time, Russ told me they were having a hard time finding a foundry that was willing to do a small run of them(like 20 heads). Apparently, they are not fast movers for Indy.
As far as the cracks go, have them pressure tested. If they don't leak, just keep running them. In some of the oval track classes, Dart iron SBC heads crack between the seats very often. The guys just keep running them........ No problems.
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads
|
|
|
|
|
|