He has a new design huh? Got a link?

Before you trust a word that AJ tells you, talk to people that have his system in their car and working. Trust me on this.

http://www.ajeracing.com/mopar.php

The stuff does look a lot different than the kit I got. Beware of the powder coating, it covers up a lot of sins.

I have a aje front end in my 71 dart,its drag race only,havent had 1 problem with it,dont know about there street stuffi use competion engerring travel limeters on it set at 3 inch

John,if your interested we have some good used strut front end stuff at the shop,maybe a whole front strut frame section,Call AJ.

Here is one of Tory's designs. I would tell everyone to do mild steel as he gives them away at $1250.

It's very nice stuff John, you know I tested it to 162mph in my car. This would be a lot easier then struts as this just bolts in.

John... this is your best bet... with that mega
block on the front end you will add about 40# to
the front weight.. you need the lightest front end
out there.. thats struts... period

Hey, 1967dartgt - Those are some nice pictures. Tory's stuff is very nice. matt

Thanks Bob. If you aren't to busy today and get a chance can you PM me AJ's phone number. Thanks

I hear you on that about the weight. I'm betting its 40 plus pounds. I'm not a wheelie type of guy and this car did some higher than I prefer for the last owner and in doing so did the funky MOPAR front end movements.

If you go with strut I'd probably be interested in your old brakes

The front suspension in my small tire car was made by Overkill Racecars. When I bought the car Stephen told me the front end could use some work especially since I planned on going from a small block to a big block. With the stock firewall we had to move a couple of bars in the front cradle (for oil pan clearance) and get the engine located before we could start getting the camber and toe-in straightened out. I tried to call Overkill to see if he had any suggestions but was unable to get a hold of him. I left a message an 6 weeks LATER he returned my call. He kinda came out and said WE meaning US had to fix his mess. Its not track tested yet but I think we have his kit mastered. Its a shame you have to fix someone's crap.


http://www.overkillracecars.com/Products.html

BGR,/AJ Casini 412-216-4727 all operators standing by.

Does anyone have a link for this ?

No website. You can pm me any questions you have.

Who makes these "strut" front ends this thread is talking about? I've never seen one.

On both of my cars I put Strange struts on them

They're not a kit as such, any I have seen done were done by chassis shops or done by the owner themselves. Pretty simple really, fab up a K-Frame or cross member, make lower control arms and mounts for the top of the shock. I will see if I can find a pic