400 Engine wire loom help - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 400 Engine wire loom help

Print Thread

400 Engine wire loom help #1859614 06/29/15 01:41 PM 06/29/15 01:41 PM
Joined: Jan 2008 Posts: 2,592 None 71rm23 OP master
71rm23 OP master Joined: Jan 2008 Posts: 2,592 None	Got a 400 rebuilt. Probably looking at TTI headers for it. Can someone post pictures of the spark plug wire looms on where they are routed? I don't have them yet but was wanting to know how everyone is routing or has routed theirs. Also, anyone know where to get them? Thanks

Re: 400 Engine wire loom help [Re: 71rm23] #1859805 06/29/15 05:49 PM 06/29/15 05:49 PM
Joined: Apr 2003 Posts: 921 Long Island, NY shocktrp super stock
shocktrp super stock Joined: Apr 2003 Posts: 921 Long Island, NY	Hooker long tubes. Boots are close so I added the wire sleeves after these pictures were taken. Got them from Summit, but they didn't come with longer valve cover bolts. Last edited by shocktrp; 06/29/15 05:50 PM.

Re: 400 Engine wire loom help [Re: shocktrp] #1859833 06/29/15 06:22 PM 06/29/15 06:22 PM
Joined: Jan 2008 Posts: 2,592 None 71rm23 OP master
71rm23 OP master Joined: Jan 2008 Posts: 2,592 None	Engine looks nice

Re: 400 Engine wire loom help [Re: 71rm23] #1860411 06/30/15 12:01 PM 06/30/15 12:01 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Well this is a 440 RB block but I use 2" TTI headers and Firecore wires. Ron

Re: 400 Engine wire loom help [Re: 383man] #1868198 07/11/15 01:00 PM 07/11/15 01:00 PM
Joined: Jan 2008 Posts: 2,592 None 71rm23 OP master
71rm23 OP master Joined: Jan 2008 Posts: 2,592 None	Originally Posted By 383man Well this is a 440 RB block but I use 2" TTI headers and Firecore wires. Ron Looking at TTI 2" or 1 7/8" headers for my 400 stroked. Was told by the guy that built my motor, not to go over 2" because the engine made so much torque. Anyway, I was looking at how and where the wires are routed. Appreciate it to all

Re: 400 Engine wire loom help [Re: 383man] #1868775 07/12/15 02:02 PM 07/12/15 02:02 PM
Joined: Aug 2008 Posts: 4,071 Mo. racerx master
racerx master Joined: Aug 2008 Posts: 4,071 Mo.	383 man........ what plug angle is on those wires?135 degrees looks like they fit tti's well

Re: 400 Engine wire loom help [Re: racerx] #1868941 07/12/15 07:16 PM 07/12/15 07:16 PM
Joined: Dec 2004 Posts: 116 Va Usa B beecrazy member
beecrazy member B Joined: Dec 2004 Posts: 116 Va Usa	Hello These are off of a 440 with Doughs D452 2" headers. Wire looms are vertical made by R&M bought from Summit they include a 2" spacer to get them away from the headers, Wires are custom length FireCore 8.5mm. Kevin

Re: 400 Engine wire loom help [Re: racerx] #1868959 07/12/15 07:45 PM 07/12/15 07:45 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Originally Posted By racerx 383 man........ what plug angle is on those wires?135 degrees looks like they fit tti's well The plug wire ends are 45 degree's and yes they fit real good with my 2" TTI's. Ron

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1