400 Engine wire loom help

Got a 400 rebuilt. Probably looking at TTI headers for it. Can someone post pictures of the spark plug wire looms on where they are routed? I don't have them yet but was wanting to know how everyone is routing or has routed theirs.

Also, anyone know where to get them?

Thanks

Hooker long tubes.
Boots are close so I added the wire sleeves after these pictures were taken.
Got them from Summit, but they didn't come with longer valve cover bolts.

Engine looks nice

Well this is a 440 RB block but I use 2" TTI headers and Firecore wires. Ron

Looking at TTI 2" or 1 7/8" headers for my 400 stroked. Was told by the guy that built my motor, not to go over 2" because the engine made so much torque. Anyway, I was looking at how and where the wires are routed.

Appreciate it to all

383 man........ what plug angle is on those wires?135 degrees looks like they fit tti's well

Hello

These are off of a 440 with Doughs D452 2" headers. Wire looms are vertical made by R&M bought from Summit they include a 2" spacer to get them away from the headers, Wires are custom length FireCore 8.5mm.

Kevin

The plug wire ends are 45 degree's and yes they fit real good with my 2" TTI's. Ron