Engine diaper q's - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Engine diaper q's

Print Thread

Engine diaper q's #1735886 01/21/15 09:09 PM 01/21/15 09:09 PM
Joined: Aug 2009 Posts: 2,041 Mooresburg, Tn ' '72CudaRacer OP top fuel
'72CudaRacer OP top fuel ' Joined: Aug 2009 Posts: 2,041 Mooresburg, Tn	Anyone here run a engine diaper with the Milodon super stock pan w/ the steering link through it? Mine is a E body, RB, Hooker Super Comp headers. Anyone stock these or are they a custom order? Thanks, Brian 8403968-100_2976.JPG (272 downloads)

Re: Engine diaper q's [Re: '72CudaRacer] #1735887 01/21/15 09:23 PM 01/21/15 09:23 PM
Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY	That is a custom deal, usually. If the pan is an off the shelf unit though you might luck out...Call them. I went the easy way and went to a rack.... '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: Engine diaper q's [Re: Dragula] #1735888 01/21/15 11:02 PM 01/21/15 11:02 PM
A Anonymous Unregistered
Anonymous Unregistered A	Call DRE Dennis Ridgeway--the best service and best blankets -- the sanctioning body sees a DRE sticker--you go right through tech--sent me a ballastic for my dragster FIT LIKE A GLOVE

Re: Engine diaper q's [Re: '72CudaRacer] #1735889 01/22/15 12:13 AM 01/22/15 12:13 AM
Joined: Jun 2010 Posts: 89 Woodbury, CT. M mcduff member
mcduff member M Joined: Jun 2010 Posts: 89 Woodbury, CT.	I run one of DRE's for my S/S Milodon Pan. I fabricated some bellows to fit over the steering drag-link and seal up the big holes. Dennis at DRE was very good at adding some heat cloth as well for the close header contact. 3 years running now no problems and the extra security knowing I have the protection is relly good. 8404182-ATCODART3001(800x611).jpg (245 downloads) Brett Miller 447 W9

Re: Engine diaper q's [Re: mcduff] #1735890 01/23/15 01:02 AM 01/23/15 01:02 AM
Joined: May 2007 Posts: 1,443 Maryland D Dads426 pro stock
Dads426 pro stock D Joined: May 2007 Posts: 1,443 Maryland	Quote: I run one of DRE's for my S/S Milodon Pan. I fabricated some bellows to fit over the steering drag-link and seal up the big holes. Dennis at DRE was very good at adding some heat cloth as well for the close header contact. 3 years running now no problems and the extra security knowing I have the protection is relly good. Ditto. I shipped the pan to DRE since we have a kick out, oil temp sender, sight glass and drag link tube. Fits very well and he added more heat material after we had a burn through. 8405235-image.jpg (171 downloads) 2012 422 Allstars NSS Champion 2013 422 Allstars NSS Champion 2014 422 Allstars NSS Champion

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1