Quote:

---

1050 dom.8896.with the car running the secondaries wont close all the way.shut the car off and every thing snaps shut like it should.

---

Also, hold the carb up to a light and check the throttle butterflies for evenness in the venturies and loosten the screws and get em as even as possible then red locktite and you`re golden.

Quote:

---

well its workin great now.all I did was take it apart and check everything that was suggested.it all checked out good.but I did notice that my rear pumpshot adjustment was extra loose.so I tightened that up so there was a very slight gap and it works perfect.

---

Normally zero gap unless you`re trying to delay/lean shot.

Quote:

---

Quote:

---

well its workin great now.all I did was take it apart and check everything that was suggested.it all checked out good.but I did notice that my rear pumpshot adjustment was extra loose.so I tightened that up so there was a very slight gap and it works perfect.

---

Normally zero gap unless you`re trying to delay/lean shot. that's actually why I had it loose but I guess there is a limit.but it worked great for awhile.theoretically you should be able to run a gap for a delayed shot.i still don't know why it was acting like that. but it will prob happen again when I somewhere where it will embarass me.

---

Quote:

---

Quote:

---

well its workin great now.all I did was take it apart and check everything that was suggested.it all checked out good.but I did notice that my rear pumpshot adjustment was extra loose.so I tightened that up so there was a very slight gap and it works perfect.

---

Normally zero gap unless you`re trying to delay/lean shot.

---

Why would you try to purposely create that situation?(trying to delay/lean shot)

Quote:

---

Quote:

---

Quote:

---

well its workin great now.all I did was take it apart and check everything that was suggested.it all checked out good.but I did notice that my rear pumpshot adjustment was extra loose.so I tightened that up so there was a very slight gap and it works perfect.

---

Normally zero gap unless you`re trying to delay/lean shot.

---

Why would you try to purposely create that situation?(trying to delay/lean shot)

---

Some I know and study go to great lengths to "fine tune" every inch and that means sometimes slowing down or delaying shot based on fuel curve data.........

Quote:

---

Quote:

---

Quote:

---

Quote:

---

well its workin great now.all I did was take it apart and check everything that was suggested.it all checked out good.but I did notice that my rear pumpshot adjustment was extra loose.so I tightened that up so there was a very slight gap and it works perfect.

---

Normally zero gap unless you`re trying to delay/lean shot.

---

Why would you try to purposely create that situation?(trying to delay/lean shot)

---

Some I know and study go to great lengths to "fine tune" every inch and that means sometimes slowing down or delaying shot based on fuel curve data.........

---

Quote:

---

Quote:

---

Quote:

---

Quote:

---

Quote:

---

well its workin great now.all I did was take it apart and check everything that was suggested.it all checked out good.but I did notice that my rear pumpshot adjustment was extra loose.so I tightened that up so there was a very slight gap and it works perfect.

---

Normally zero gap unless you`re trying to delay/lean shot.

---

Why would you try to purposely create that situation?(trying to delay/lean shot)

---

Some I know and study go to great lengths to "fine tune" every inch and that means sometimes slowing down or delaying shot based on fuel curve data.........

---

that's exacly what I was trying to do.

---

VERY doable yet VERY time consuming..............

Quote:

---

Quote:

---

Quote:

---

well its workin great now.all I did was take it apart and check everything that was suggested.it all checked out good.but I did notice that my rear pumpshot adjustment was extra loose.so I tightened that up so there was a very slight gap and it works perfect.

---

Normally zero gap unless you`re trying to delay/lean shot.

---

Why would you try to purposely create that situation?(trying to delay/lean shot)

---

I've seen a bunch of stock Holley Dominators as well as other D.P. come from Holley maladjusted like that Another one of the checks you need to perform beofre using any of them