Quick ratio pitman arms and E bodies - Moparts Forums

Register Log In Moparts Forums Corners Are Best - Handling Tech Quick ratio pitman arms and E bodies

Print Thread

Quick ratio pitman arms and E bodies #1684854 10/12/14 06:43 PM 10/12/14 06:43 PM
Joined: Oct 2010 Posts: 463 Rescue CA. joes68340s OP mopar
joes68340s OP mopar Joined: Oct 2010 Posts: 463 Rescue CA.	TTI headers there is some confusion on my part. Can quick ratio pitman arm work with tti headers on E bodies.

Re: Quick ratio pitman arms and E bodies [Re: joes68340s] #1684855 10/12/14 06:48 PM 10/12/14 06:48 PM
Joined: Dec 2010 Posts: 12,375 SoCal MuuMuu101 I got lucky at Woodward!
MuuMuu101 I got lucky at Woodward! Joined: Dec 2010 Posts: 12,375 SoCal	Which engine?

Re: Quick ratio pitman arms and E bodies [Re: MuuMuu101] #1684856 10/12/14 07:08 PM 10/12/14 07:08 PM
Joined: Oct 2010 Posts: 463 Rescue CA. joes68340s OP mopar
joes68340s OP mopar Joined: Oct 2010 Posts: 463 Rescue CA.	!970 340 Cuda.

Re: Quick ratio pitman arms and E bodies [Re: joes68340s] #1684857 10/12/14 07:37 PM 10/12/14 07:37 PM
Joined: Jun 2007 Posts: 2,432 NorCal RylisPro top fuel
RylisPro top fuel Joined: Jun 2007 Posts: 2,432 NorCal	I have Doug's D453 headers and fast ratio arms on my 340 ebody 73 `Cuda Instagram: @rylispro YouTube: RylisPro www.rylispro.com 925-214-9192

Re: Quick ratio pitman arms and E bodies [Re: RylisPro] #1684858 10/14/14 02:51 AM 10/14/14 02:51 AM
Joined: Aug 2005 Posts: 371 Kings Beach, CA T tahoechallenge enthusiast
tahoechallenge enthusiast T Joined: Aug 2005 Posts: 371 Kings Beach, CA	I use the fast ratio pitman and idler arms on my 340 powered Challenger with TTi's with no problems. I did remove the grease fitting from the idler. It rubbed the header a little.

Re: Quick ratio pitman arms and E bodies [Re: tahoechallenge] #1684859 10/14/14 05:18 PM 10/14/14 05:18 PM
Joined: Oct 2010 Posts: 463 Rescue CA. joes68340s OP mopar
joes68340s OP mopar Joined: Oct 2010 Posts: 463 Rescue CA.	Thanks for replys

Re: Quick ratio pitman arms and E bodies [Re: tahoechallenge] #1684860 10/14/14 05:52 PM 10/14/14 05:52 PM
Joined: Dec 2004 Posts: 801 central CT cudazappa super stock
cudazappa super stock Joined: Dec 2004 Posts: 801 central CT	Quote: I use the fast ratio pitman and idler arms on my 340 powered Challenger with TTi's with no problems. I did remove the grease fitting from the idler. It rubbed the header a little. I had a worn engine mount with my doug's small block headers and fast ratio and encountered the same problem. Changed the mounts and I'm fine now. 1971 Challenger

Re: Quick ratio pitman arms and E bodies [Re: cudazappa] #1684861 10/14/14 06:59 PM 10/14/14 06:59 PM
Joined: Feb 2003 Posts: 16,137 Mesa, Arizona D dart4forte I Live Here
dart4forte I Live Here D Joined: Feb 2003 Posts: 16,137 Mesa, Arizona	Quote: Quote: I use the fast ratio pitman and idler arms on my 340 powered Challenger with TTi's with no problems. I did remove the grease fitting from the idler. It rubbed the header a little. I had a worn engine mount with my doug's small block headers and fast ratio and encountered the same problem. Changed the mounts and I'm fine now. Must be a common problem on all B bodies. I have a 71 RR and had the same problem. Had to remove the grease zerk.

Re: Quick ratio pitman arms and E bodies [Re: dart4forte] #1684862 10/16/14 06:42 AM 10/16/14 06:42 AM
Joined: Jan 2005 Posts: 4,862 the frozen wastes... Pale_Roader Swears too much
Pale_Roader Swears too much Joined: Jan 2005 Posts: 4,862 the frozen wastes...	Hmmm... ANOTHER point for the smallblock over the bigblock... I'm never going to decide...

Re: Quick ratio pitman arms and E bodies [Re: Pale_Roader] #1684863 10/16/14 09:20 AM 10/16/14 09:20 AM
Joined: Jan 2009 Posts: 813 Ontario,Canada brads70 super stock
brads70 super stock Joined: Jan 2009 Posts: 813 Ontario,Canada	Quote: Hmmm... ANOTHER point for the smallblock over the bigblock... I'm never going to decide... I'm using headman headers and FF quick ratio arms with my 451" no problems. Well not exactly true header fitment was an issue.

Re: Quick ratio pitman arms and E bodies [Re: Pale_Roader] #1684864 10/18/14 09:22 AM 10/18/14 09:22 AM
Joined: Jan 2003 Posts: 2,042 MD RTSE4ME top fuel
RTSE4ME top fuel Joined: Jan 2003 Posts: 2,042 MD	FF quick ratio arms with 2" TTI headers on my 505" RB. Plenty of clearance.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer, tommoparts

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1