Moparts

Quick ratio pitman arms and E bodies

Posted By: joes68340s

Quick ratio pitman arms and E bodies - 10/12/14 10:43 PM

TTI headers there is some confusion on my part. Can quick ratio pitman arm work with tti headers on E bodies.

Posted By: MuuMuu101

Re: Quick ratio pitman arms and E bodies - 10/12/14 10:48 PM

Which engine?

Posted By: joes68340s

Re: Quick ratio pitman arms and E bodies - 10/12/14 11:08 PM

!970 340 Cuda.

Posted By: RylisPro

Re: Quick ratio pitman arms and E bodies - 10/12/14 11:37 PM

I have Doug's D453 headers and fast ratio arms on my 340 ebody

Posted By: tahoechallenge

Re: Quick ratio pitman arms and E bodies - 10/14/14 06:51 AM

I use the fast ratio pitman and idler arms on my 340 powered Challenger with TTi's with no problems. I did remove the grease fitting from the idler. It rubbed the header a little.

Posted By: joes68340s

Re: Quick ratio pitman arms and E bodies - 10/14/14 09:18 PM

Thanks for replys

Posted By: cudazappa

Re: Quick ratio pitman arms and E bodies - 10/14/14 09:52 PM

Quote:

I use the fast ratio pitman and idler arms on my 340 powered Challenger with TTi's with no problems. I did remove the grease fitting from the idler. It rubbed the header a little.

I had a worn engine mount with my doug's small block headers and fast ratio and encountered the same problem. Changed the mounts and I'm fine now.

Posted By: dart4forte

Re: Quick ratio pitman arms and E bodies - 10/14/14 10:59 PM

Quote:

Quote:

I use the fast ratio pitman and idler arms on my 340 powered Challenger with TTi's with no problems. I did remove the grease fitting from the idler. It rubbed the header a little.

I had a worn engine mount with my doug's small block headers and fast ratio and encountered the same problem. Changed the mounts and I'm fine now.

Must be a common problem on all B bodies. I have a 71 RR and had the same problem. Had to remove the grease zerk.

Posted By: Pale_Roader

Re: Quick ratio pitman arms and E bodies - 10/16/14 10:42 AM

Hmmm... ANOTHER point for the smallblock over the bigblock... I'm never going to decide...

Posted By: brads70

Re: Quick ratio pitman arms and E bodies - 10/16/14 01:20 PM

Quote:

Hmmm... ANOTHER point for the smallblock over the bigblock... I'm never going to decide...

I'm using headman headers and FF quick ratio arms with my 451" no problems.

Well not exactly true header fitment was an issue.

Posted By: RTSE4ME

Re: Quick ratio pitman arms and E bodies - 10/18/14 01:22 PM

FF quick ratio arms with 2" TTI headers on my 505" RB. Plenty of clearance.