|
Re: Valve Body Questions
[Re: ChargerKnight66]
#1660813
08/19/14 03:59 PM
08/19/14 03:59 PM
|
Joined: Jan 2003
Posts: 26,470 Rio Linda, CA
John_Kunkel
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 26,470
Rio Linda, CA
|
First, do you know if the governor was removed when the MVB was installed? If so, it'll need to be replaced before installing an auto VB.
The '74 isn't an ideal swap into a '67, lots of fluid circuit changes were made starting in '74.
The stop tabs have definitely been removed, they're needed.
On the pressure regulator, measure from the VB side of the steel spring retainer to the casting...should be in the 1 1/4" to 1 1/8" range.
The INTERNET, the MISinformation superhighway
|
|
|
Re: Valve Body Questions
[Re: ChargerKnight66]
#1660815
08/21/14 03:28 PM
08/21/14 03:28 PM
|
Joined: Jan 2003
Posts: 26,470 Rio Linda, CA
John_Kunkel
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 26,470
Rio Linda, CA
|
The stop tab on the cam sets the forward limit of the external TP lever and its linkage.
The INTERNET, the MISinformation superhighway
|
|
|
|
|
|