E brake routing with rame connectors - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum E brake routing with rame connectors

Print Thread

E brake routing with rame connectors #1647544 07/17/14 02:53 PM 07/17/14 02:53 PM
Joined: Feb 2010 Posts: 155 Maryland rhamson OP member
rhamson OP member Joined: Feb 2010 Posts: 155 Maryland	I know I have seen it here before so can anybody give me some ideas about routing my e brake cables through the frame connectors?

Re: E brake routing with rame connectors [Re: rhamson] #1647545 07/17/14 04:56 PM 07/17/14 04:56 PM
Joined: Jun 2003 Posts: 21,448 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,448 It's a dry heat	1 8211348-8-01-.JPG (197 downloads)

Re: E brake routing with rame connectors [Re: gtx6970] #1647546 07/17/14 04:57 PM 07/17/14 04:57 PM
Joined: Jun 2003 Posts: 21,448 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,448 It's a dry heat	2 8211349-8-01-(2).JPG (256 downloads)

Re: E brake routing with rame connectors [Re: gtx6970] #1647547 07/17/14 04:57 PM 07/17/14 04:57 PM
Joined: Jun 2003 Posts: 21,448 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,448 It's a dry heat	3 8211351-8-01-(4).JPG (256 downloads)

Re: E brake routing with rame connectors [Re: gtx6970] #1647548 07/17/14 04:58 PM 07/17/14 04:58 PM
Joined: Jun 2003 Posts: 21,448 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,448 It's a dry heat	4 8211352-8-01-(3).JPG (242 downloads)

Re: E brake routing with rame connectors [Re: gtx6970] #1647549 07/17/14 04:59 PM 07/17/14 04:59 PM
Joined: Jun 2003 Posts: 21,448 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,448 It's a dry heat	The outside of the frame connector just has a 1/2" ID bronze sleeve held in with JB weld. Been almost 3 years like this and no problems what so ever 5 8211355-100_1731.jpg (210 downloads)

Re: E brake routing with rame connectors [Re: gtx6970] #1647550 07/17/14 05:00 PM 07/17/14 05:00 PM
Joined: Jun 2003 Posts: 21,448 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,448 It's a dry heat	pass side. It's just a GM ( cough,cough) Battery J bolt 8211356-100_1733.jpg (241 downloads)

Re: E brake routing with rame connectors [Re: gtx6970] #1647551 07/18/14 02:34 PM 07/18/14 02:34 PM
Joined: Feb 2010 Posts: 155 Maryland rhamson OP member
rhamson OP member Joined: Feb 2010 Posts: 155 Maryland	Did you slot this into the frame connector so that the travel of the piece would not be restricted? I ask this because I have seen others that just brought a tube through the connector and everything was outside of it. Thanks for the information. Last edited by rhamson; 07/18/14 02:36 PM.

Re: E brake routing with rame connectors [Re: rhamson] #1647552 07/19/14 02:03 AM 07/19/14 02:03 AM
Joined: Apr 2012 Posts: 143 MI C chapdog105 member
chapdog105 member C Joined: Apr 2012 Posts: 143 MI	Here's my 69 Plymouth Roadrunner convertible with US Car Tool frame connectors.

Re: E brake routing with rame connectors [Re: rhamson] #1647553 07/19/14 10:53 AM 07/19/14 10:53 AM
Joined: Jun 2003 Posts: 21,448 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,448 It's a dry heat	Quote: Did you slot this into the frame connector so that the travel of the piece would not be restricted? I ask this because I have seen others that just brought a tube through the connector and everything was outside of it. Thanks for the information. Correct. the location of the connector ( a 1/2" in either direction side to side ) and length of the cable are factors if you do or don't have to slot the connector. I wanted no issues no matter how hard the cars owner pushed on the emer brake pedal. There for I slotted it.

Re: E brake routing with rame connectors [Re: rhamson] #1647554 07/19/14 02:03 PM 07/19/14 02:03 PM
Joined: Feb 2003 Posts: 374 Wisconsin Mopar_Mudder enthusiast
Mopar_Mudder enthusiast Joined: Feb 2003 Posts: 374 Wisconsin	Here is another thread with pictures of mine and others in it. E-Brake 1971 Hemi Cuda 2005 SRT-10 Regular Cab Flame Red. 12.771 @ 109.67<---TIME SLIP--Video

Re: E brake routing with rame connectors [Re: Mopar_Mudder] #1647555 07/21/14 10:48 AM 07/21/14 10:48 AM
Joined: Feb 2010 Posts: 155 Maryland rhamson OP member
rhamson OP member Joined: Feb 2010 Posts: 155 Maryland	Thank you for all the information. I was wondering about any exhaust interference but I found you did address it. Thanks again.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1