Re: Rocker oiling on Indy 360-2 cylinder heads
[Re: cj391]
#1602911
04/03/14 11:58 PM
04/03/14 11:58 PM
|
Joined: Apr 2009
Posts: 3,416 Toronto
mshred
OP
master
|
OP
master
Joined: Apr 2009
Posts: 3,416
Toronto
|
Quote:
you'll be good. I had the same concern with my w2's, put it together and it oiled fine.
My current RHS heads could be exactly the same, but I can't remember right now to be honest as they are on the car and it is in storage
|
|
|
Re: Rocker oiling on Indy 360-2 cylinder heads
[Re: mshred]
#1602912
04/04/14 12:44 AM
04/04/14 12:44 AM
|
Joined: Oct 2009
Posts: 1,267 North, Alabama
D-50
pro stock
|
pro stock
Joined: Oct 2009
Posts: 1,267
North, Alabama
|
I am running the 360-2 also but I am using the ARP head bolts instead of the studs. I have had no issues so far.I am also oiling through the push rods.
1.33 60 ft,6.21 at 110.59 in the 1/8, pump gas small block,2950lbs,drag radials,mufflers and driven to track ...
|
|
|
Re: Rocker oiling on Indy 360-2 cylinder heads
[Re: Scamp408]
#1602914
04/04/14 09:20 AM
04/04/14 09:20 AM
|
Joined: Oct 2007
Posts: 3,978 Hilltown Pa
1967dartgt
master
|
master
Joined: Oct 2007
Posts: 3,978
Hilltown Pa
|
I just ran arp studs with no problems.
Brett Miller W9 cnc'd heads STR Chassis fabraction
|
|
|
Re: Rocker oiling on Indy 360-2 cylinder heads
[Re: Scamp408]
#1602916
04/04/14 12:30 PM
04/04/14 12:30 PM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
master
|
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
Quote:
Have the arp stud thinned out alittle in the middle by a machine shop.Also ck the shaft stud.
Doesnt need to be ground in half, but look at the rocker studs that came with your T&D rockers, you will see how they are ground in the center. Do the same with the 2 head studs, and you should have no issues whatsoever.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: Rocker oiling on Indy 360-2 cylinder heads
[Re: mshred]
#1602918
04/04/14 04:37 PM
04/04/14 04:37 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
I am glad I asked this question and caught this before bolting the heads on! I will take a look at the rocker studs and do the same to the head studs.
Pays to look over the finer details
Measure the studs and measure the holes in the heads.. your head studs being a larger dia(1/2") might have plenty of clearance since your playing with a larger dia which is more area
|
|
|
|
|