I have a 69 Roadrunner that was an original drum brake car. I am converting to discs. I bought the spindles and calipers that I was told to buy. I now need to buy the brackets to weld on to my current lower control arms to be able to use a 1970 sway bar. Can anyone point me in the direction of where to buy these brackets? Also need to buy the sway bar as well. Anyone have a used one they want to sell?

Why ?

You can use the swaybar you have, just mount the calipers to the rear like the factory did .

Read this...

https://board.moparts.org/ubbthreads/show...e=1#Post8063703

jess

You will need the brackets that the sway bar bushing brackets bolt to. They bolt to the k member. You should also check to make sure that your k member will accept the 70 model swaybar, I believe some of the earlier ones will not. just my

jess

I havent gotten that far along yet. I just purchased what someone told me I needed. Trying to collect parts as I go along so it doesnt hit me so hard at the end. just going on the advice I got

Thanks Jess. Those are the brackets I was told to get and weld on to my lower control arms.

these are Hotchkis sway bar tabs I bought & welded on, they worked out great. Its on my 71, not sure how much different a sway bar setup is on a 70 but this what they are.

hope this helps.

E

[image][/image]

[image][/image]

[image][/image]