Valve covers - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Valve covers

Print Thread

Valve covers #1578929 02/14/14 04:15 PM 02/14/14 04:15 PM
Joined: Mar 2013 Posts: 47 CO N Nitrojunkee OP member
Nitrojunkee OP member N Joined: Mar 2013 Posts: 47 CO	Hey guys, just wondering if any of you know of a specific fabricated aluminum valve cover, that will for sure fit a Wedge with Edelbrock RPM heads, T&D rocers, TTI 2" headers, and MSD pro billet distributor? I'd really like to find something that will just bolt on, without having to massage them at all. Any ideas?

Re: Valve covers [Re: Nitrojunkee] #1578930 02/14/14 08:40 PM 02/14/14 08:40 PM
Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard... mopar65 master
mopar65 master Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard...	on my old 65 Plymouth i ran the mopar black wrinkle aluminum valve covers and if i remember right they fit with no problems. mopar65 8039777-DSCF0093.JPG (55 downloads) 3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops

Re: Valve covers [Re: mopar65] #1578931 02/14/14 09:00 PM 02/14/14 09:00 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Bought these from Mancini. I have Indy EZ heads and Hughes rockers with TTI 2" headers and these fit great with no modifying at all. And they have a baffle in them. Ron

Re: Valve covers [Re: 383man] #1578932 02/14/14 09:24 PM 02/14/14 09:24 PM
Joined: Aug 2008 Posts: 4,072 Mo. racerx master
racerx master Joined: Aug 2008 Posts: 4,072 Mo.	Quote: Bought these from Mancini. I have Indy EZ heads and Hughes rockers with TTI 2" headers and these fit great with no modifying at all. And they have a baffle in them. Ron How bout leaking any problems with that?

Re: Valve covers [Re: racerx] #1578933 02/14/14 09:30 PM 02/14/14 09:30 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Quote: Quote: Bought these from Mancini. I have Indy EZ heads and Hughes rockers with TTI 2" headers and these fit great with no modifying at all. And they have a baffle in them. Ron How bout leaking any problems with that? No leaks at all as thats why I went with them. With the EZ heads I can use the blue Moroso gaskets that are rubber with the metal insert and they seal great. Ron Last edited by 383man; 02/14/14 09:31 PM.

Re: Valve covers [Re: Nitrojunkee] #1578934 02/15/14 12:57 AM 02/15/14 12:57 AM
Joined: Aug 2003 Posts: 43,228 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,228 Bend,OR USA	All the good cast aluminum valve covers(Holley, Eddy, Cal Custom, Mopars, Offy and so on will clear the T&D and Harland Sharps with 1.65 ratio on a big roller cam I can't say on the fabricated covers as I haven't ran them yet, maybe someday when I find a set I like Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1