1971 Challenger Convertible Tack Strip Hardware - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum 1971 Challenger Convertible Tack Strip Hardware

Print Thread

1971 Challenger Convertible Tack Strip Hardware #1489835 08/24/13 12:30 PM 08/24/13 12:30 PM
Joined: Dec 2008 Posts: 109 Texas K Knappy OP member
Knappy OP member K Joined: Dec 2008 Posts: 109 Texas	What do the bolts that hold the rear convertible tack stripes down look like? Does anyone reproduce them. Look like 1/4 inch with large washers. My project has the strips but no bolts. 68 Coronet R/T Hemi 70 Challenger 440-6 70 Challenger R/T S/E 440-6 71 Challenger Convert. 70 Superbird 440-6

Re: 1971 Challenger Convertible Tack Strip Hardware [Re: Knappy] #1489836 08/25/13 11:20 AM 08/25/13 11:20 AM
Joined: Sep 2003 Posts: 637 SE PA C cudaize mopar
cudaize mopar C Joined: Sep 2003 Posts: 637 SE PA	These are the ones that go in the curved side pieces with the large round hole. 7826615-DSC01286sm.jpg (87 downloads)

Re: 1971 Challenger Convertible Tack Strip Hardware [Re: cudaize] #1489837 08/25/13 11:21 AM 08/25/13 11:21 AM
Joined: Sep 2003 Posts: 637 SE PA C cudaize mopar
cudaize mopar C Joined: Sep 2003 Posts: 637 SE PA	side view 7826616-DSC01287sm.jpg (84 downloads)

Re: 1971 Challenger Convertible Tack Strip Hardware [Re: cudaize] #1489838 08/25/13 11:22 AM 08/25/13 11:22 AM
Joined: Sep 2003 Posts: 637 SE PA C cudaize mopar
cudaize mopar C Joined: Sep 2003 Posts: 637 SE PA	Bolts for center rear strip 7826619-DSC01290sm.jpg (77 downloads)

Re: 1971 Challenger Convertible Tack Strip Hardware [Re: cudaize] #1489839 08/25/13 11:22 AM 08/25/13 11:22 AM
Joined: Sep 2003 Posts: 637 SE PA C cudaize mopar
cudaize mopar C Joined: Sep 2003 Posts: 637 SE PA	length 7826621-DSC01292sm.jpg (69 downloads)

Re: 1971 Challenger Convertible Tack Strip Hardware [Re: cudaize] #1489840 08/25/13 01:23 PM 08/25/13 01:23 PM
Joined: Jan 2003 Posts: 7,327 Toronto (YYZ) Ontario YYZ master
YYZ master Joined: Jan 2003 Posts: 7,327 Toronto (YYZ) Ontario	I believe that Jules the Wiperman may have made a run of the rectangular washers at one time...

Re: 1971 Challenger Convertible Tack Strip Hardware [Re: YYZ] #1489841 08/26/13 11:52 AM 08/26/13 11:52 AM
Joined: Dec 2008 Posts: 109 Texas K Knappy OP member
Knappy OP member K Joined: Dec 2008 Posts: 109 Texas	Thanks Guys, That's what I needed to know. 68 Coronet R/T Hemi 70 Challenger 440-6 70 Challenger R/T S/E 440-6 71 Challenger Convert. 70 Superbird 440-6

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1