Posted By: Knappy
1971 Challenger Convertible Tack Strip Hardware - 08/24/13 04:30 PM
What do the bolts that hold the rear convertible tack stripes down look like? Does anyone reproduce them. Look like 1/4 inch with large washers. My project has the strips but no bolts.
Posted By: cudaize
Re: 1971 Challenger Convertible Tack Strip Hardware - 08/25/13 03:20 PM
These are the ones that go in the curved side pieces with the large round hole.
Posted By: cudaize
Re: 1971 Challenger Convertible Tack Strip Hardware - 08/25/13 03:22 PM
Bolts for center rear strip
Posted By: YYZ
Re: 1971 Challenger Convertible Tack Strip Hardware - 08/25/13 05:23 PM
I believe that Jules the Wiperman may have made a run of the rectangular washers at one time...
Posted By: Knappy
Re: 1971 Challenger Convertible Tack Strip Hardware - 08/26/13 03:52 PM
Thanks Guys,
That's what I needed to know.