Speedo cable - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Speedo cable

Print Thread

Speedo cable #1422376 04/20/13 11:22 AM 04/20/13 11:22 AM
Joined: Sep 2007 Posts: 33 Detroit, Mi V vjb OP member
vjb OP member V Joined: Sep 2007 Posts: 33 Detroit, Mi	I have a 65 Coronet, /6, 3sp. and don't know where to connect the drive end of the speedo cable. Can someone post some pics to show where it connects and where it is routed and anchored. The car did not have a speedo cable when I got it. The cable ends have female fittings and where I thought the cable went on the trans also has female threads. I need help. Thanks

Re: Speedo cable [Re: vjb] #1422377 04/20/13 04:51 PM 04/20/13 04:51 PM
Joined: Jan 2003 Posts: 25,796 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,796 Rio Linda, CA	The transmission should have a smooth hole where the end of the cable pushes in. The bottom end of the cable will look like the pic below. 7675561-Speedogear.jpg (62 downloads)

Re: Speedo cable [Re: John_Kunkel] #1422378 04/20/13 05:13 PM 04/20/13 05:13 PM
Joined: Sep 2007 Posts: 33 Detroit, Mi V vjb OP member
vjb OP member V Joined: Sep 2007 Posts: 33 Detroit, Mi	Where does the cable push in? I have obviously been looking in the wrong place. v

Re: Speedo cable [Re: vjb] #1422379 04/21/13 05:23 PM 04/21/13 05:23 PM
Joined: Jan 2003 Posts: 25,796 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,796 Rio Linda, CA	It plugs in behind the mount pad on the drivers side. Orange line) There is a small threaded hole next to it for a bolt that holds a retainer for the cable housing. 7676743-SpeedoHole.JPG (34 downloads)

Re: Speedo cable [Re: John_Kunkel] #1422380 04/21/13 10:10 PM 04/21/13 10:10 PM
Joined: Sep 2007 Posts: 33 Detroit, Mi V vjb OP member
vjb OP member V Joined: Sep 2007 Posts: 33 Detroit, Mi	Thanks for the pix, that helped a lot. Now I find that I need the pinion gear. Thanks for the help V

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1