|
Race harmonic balancer ?
#1405655
03/20/13 09:59 PM
03/20/13 09:59 PM
|
Joined: Oct 2009
Posts: 1,267 North, Alabama
D-50
OP
pro stock
|
OP
pro stock
Joined: Oct 2009
Posts: 1,267
North, Alabama
|
I was looking at the ATI balancers on the Summit web sight and I narrowed it down to 3 balancers.One was steel and the other 2 were aluminum.That was the only difference.The 2 aluminum ones are described the same but they are different prices. It will go on a 340 with a 3.79 stroke crank,internal balance pump gas motor. Which one do I need
1.33 60 ft,6.21 at 110.59 in the 1/8, pump gas small block,2950lbs,drag radials,mufflers and driven to track ...
|
|
|
Re: Race harmonic balancer ?
[Re: jamesc]
#1405658
03/21/13 03:32 AM
03/21/13 03:32 AM
|
Joined: May 2005
Posts: 6,446 NJ-USA
HPMike
master
|
master
Joined: May 2005
Posts: 6,446
NJ-USA
|
Quote:
personally i would run the steel one 2¢
MB
|
|
|
Re: Race harmonic balancer ?
[Re: HPMike]
#1405660
03/22/13 10:33 PM
03/22/13 10:33 PM
|
Joined: Oct 2009
Posts: 1,267 North, Alabama
D-50
OP
pro stock
|
OP
pro stock
Joined: Oct 2009
Posts: 1,267
North, Alabama
|
I guess from the replys I got I need to order the steel one. Thanks....
1.33 60 ft,6.21 at 110.59 in the 1/8, pump gas small block,2950lbs,drag radials,mufflers and driven to track ...
|
|
|
|
|
|