|
|
A lifter problem, or ??
#1402509
03/14/13 06:34 PM
03/14/13 06:34 PM
|
Joined: May 2012
Posts: 100
Tennessee
meep_meep
OP
member
|
OP
member
Joined: May 2012
Posts: 100
Tennessee
|
Hey folks  I was driving my RR around town today, and it developed a pretty bad lifter tick/clack...it got to where it was missing on the cylinder in question  This is a 86 roller cam 318... here is a video of the issue... http://www.youtube.com/watch?v=I8SF6nTdB3k
Last edited by meep_meep; 03/14/13 06:39 PM.
|
|
|
Re: A lifter problem, or ??
[Re: meep_meep]
#1402510
03/14/13 06:46 PM
03/14/13 06:46 PM
|
Joined: Jan 2003
Posts: 75,043
U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,043
U.S.S.A.
|
Quote:
Hey folks
I was driving my RR around town today, and it developed a pretty bad lifter tick/clack...it got to where it was missing on the cylinder in question
This is a 86 roller cam 318...
here is a video of the issue...
http://www.youtube.com/watch?v=I8SF6nTdB3k
Something is obviously wrong , is it a roller cam motor ? If so you are going to have to pull the intake to pull the lifter out to figure it out.
If it's a flat tappet engine it's either a collapsed lifter or the cam lobe is going flat .
|
|
|
Re: A lifter problem, or ??
[Re: JohnRR]
#1402511
03/14/13 07:04 PM
03/14/13 07:04 PM
|
Joined: May 2012
Posts: 100
Tennessee
meep_meep
OP
member
|
OP
member
Joined: May 2012
Posts: 100
Tennessee
|
Quote:
Quote:
Hey folks
I was driving my RR around town today, and it developed a pretty bad lifter tick/clack...it got to where it was missing on the cylinder in question
This is a 86 roller cam 318...
here is a video of the issue...
http://www.youtube.com/watch?v=I8SF6nTdB3k
Something is obviously wrong , is it a roller cam motor ? If so you are going to have to pull the intake to pull the lifter out to figure it out.
If it's a flat tappet engine it's either a collapsed lifter or the cam lobe is going flat .
It's a roller cam motor...and yeah..i already figured i was gonna have to yank the intake off lol, was just hoping someone would chime in that has had a similar issue ...damn, i just put that intake on there too
|
|
|
|
|
|
|
