A lifter problem, or ??

Quote:

---

Hey folks

I was driving my RR around town today, and it developed a pretty bad lifter tick/clack...it got to where it was missing on the cylinder in question

This is a 86 roller cam 318...

here is a video of the issue...

http://www.youtube.com/watch?v=I8SF6nTdB3k

---

Quote:

---

Quote:

---

Hey folks

I was driving my RR around town today, and it developed a pretty bad lifter tick/clack...it got to where it was missing on the cylinder in question

This is a 86 roller cam 318...

here is a video of the issue...

http://www.youtube.com/watch?v=I8SF6nTdB3k

---

Something is obviously wrong , is it a roller cam motor ? If so you are going to have to pull the intake to pull the lifter out to figure it out.

If it's a flat tappet engine it's either a collapsed lifter or the cam lobe is going flat .

---

It's a roller cam motor...and yeah..i already figured i was gonna have to yank the intake off lol, was just hoping someone would chime in that has had a similar issue ...damn, i just put that intake on there too