Need the link to the latest Gen3 Hemi that made 719hp - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Need the link to the latest Gen3 Hemi that made 719hp

Print Thread

Page 1 of 2

1

2

Need the link to the latest Gen3 Hemi that made 719hp #1381825 02/05/13 12:37 AM 02/05/13 12:37 AM
Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY Dragula OP I Live Here
Dragula OP I Live Here Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY	Can't find it anywhere...Need a link '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: Dragula] #1381826 02/05/13 12:41 AM 02/05/13 12:41 AM
Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard... mopar65 master
mopar65 master Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard...	are you talking about the one Dave young built in the mopar muscle mag? 3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: mopar65] #1381827 02/05/13 12:49 AM 02/05/13 12:49 AM
Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY Dragula OP I Live Here
Dragula OP I Live Here Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY	Quote: are you talking about the one Dave young built in the mopar muscle mag? It was in one of the Mopar Mags, and it looked like it was built by Indy, I thought. I did not have time to read it...But I have time now. '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: Dragula] #1381828 02/05/13 01:26 AM 02/05/13 01:26 AM
Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard... mopar65 master
mopar65 master Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard...	yes you are right it was Indy cylinder head and Dave young build.the mag is Volume 26 number 04 April 2013 page 28 ( CAN YOU HEMI NOW? PART II so far the mopar muscle web site sucks for trying to find past tech stuff. 3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: mopar65] #1381829 02/05/13 08:55 AM 02/05/13 08:55 AM
A Anonymous Unregistered
Anonymous Unregistered A	The engine was pretty straight forward. It was a 6.1 block, .030 over, stroked to 426 roughly, 10.7:1 C.R, CNC ported 6.4 apache heads, fairly conservative cam, drag pack intake and a 950 HP carb. I was truly impressed with the numbers it made.

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: ] #1381830 02/05/13 01:46 PM 02/05/13 01:46 PM
Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY Dragula OP I Live Here
Dragula OP I Live Here Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY	Quote: The engine was pretty straight forward. It was a 6.1 block, .030 over, stroked to 426 roughly, 10.7:1 C.R, CNC ported 6.4 apache heads, fairly conservative cam, drag pack intake and a 950 HP carb. I was truly impressed with the numbers it made. Thought I saw 10.85:1 compression and didn't have time to catch head flow, cam specs, and cubes...So it was 426 cubes? I think I gots to have me one.. '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: Dragula] #1381831 02/05/13 01:56 PM 02/05/13 01:56 PM
Joined: Nov 2003 Posts: 1,969 Chandler, AZ Duner top fuel
Duner top fuel Joined: Nov 2003 Posts: 1,969 Chandler, AZ	I think I want one too.... but I want to make 700 hp - then put some boost to it.

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: Dragula] #1381832 02/05/13 02:34 PM 02/05/13 02:34 PM
A Anonymous Unregistered
Anonymous Unregistered A	Quote: Quote: The engine was pretty straight forward. It was a 6.1 block, .030 over, stroked to 426 roughly, 10.7:1 C.R, CNC ported 6.4 apache heads, fairly conservative cam, drag pack intake and a 950 HP carb. I was truly impressed with the numbers it made. Thought I saw 10.85:1 compression and didn't have time to catch head flow, cam specs, and cubes...So it was 426 cubes? I think I gots to have me one.. I think your right about the compression, I dont know why I was thinking 10.7, but still that is a very conservative ratio. I believe the heads had the Indy wind jammer CNC port program and they flowed 370 CFM at peak, dont remember the lift.

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: ] #1381833 02/05/13 02:45 PM 02/05/13 02:45 PM
Joined: Sep 2003 Posts: 10,645 Houston, Tx A AlexP I Live Here
AlexP I Live Here A Joined: Sep 2003 Posts: 10,645 Houston, Tx	I need to find this article. My Build thread: Let the hemi swap begin! 1968 wanna be pro touring whatchamacallit with some fancy stuff and a new roof skin.

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: AlexP] #1381834 02/05/13 03:27 PM 02/05/13 03:27 PM
Joined: Jun 2003 Posts: 9,225 Charleston S sixpackgut Drag Week Mod Champion
sixpackgut Drag Week Mod Champion S Joined: Jun 2003 Posts: 9,225 Charleston	wow, maybe I should get mine running to find out what mine makes Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: AlexP] #1381835 02/05/13 05:01 PM 02/05/13 05:01 PM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Quote: I need to find this article. Mopar Muscle April edition.

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: sixpackgut] #1381836 02/05/13 05:02 PM 02/05/13 05:02 PM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Quote: wow, maybe I should get mine running to find out what mine makes Yes you do!!!

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: sixpackgut] #1381837 02/05/13 05:06 PM 02/05/13 05:06 PM
Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY Dragula OP I Live Here
Dragula OP I Live Here Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY	Quote: wow, maybe I should get mine running to find out what mine makes Or sell it to me... '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: Dragula] #1381838 02/05/13 05:41 PM 02/05/13 05:41 PM
Joined: Jun 2003 Posts: 9,225 Charleston S sixpackgut Drag Week Mod Champion
sixpackgut Drag Week Mod Champion S Joined: Jun 2003 Posts: 9,225 Charleston	Quote: Quote: wow, maybe I should get mine running to find out what mine makes Or sell it to me... you have to many hemis already! Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: sixpackgut] #1381839 02/05/13 06:45 PM 02/05/13 06:45 PM
Joined: Jan 2003 Posts: 17,918 Akron, Ohio ProSport I Live Here
ProSport I Live Here Joined: Jan 2003 Posts: 17,918 Akron, Ohio	I believe 340Rick's motor is a 426" 6.1 with CNC ported heads and a mild roller with around 700HP. Runs 9.90's in his 70 Challenger. 7576673-DSC00351.jpg (83 downloads)

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: sixpackgut] #1381840 02/05/13 06:48 PM 02/05/13 06:48 PM
Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY Dragula OP I Live Here
Dragula OP I Live Here Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY	I also need the link and cannot find it. I want the facts...not inaccurate hearsay. ...And I can always use another Hemi! As much as the newer wedge technology impress's me, they are still just a wedge. And soon, OEM blocks and such won't be that easy to find. Time to switch gears. Last edited by Dragula; 02/05/13 06:48 PM. '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: Dragula] #1381841 02/05/13 07:02 PM 02/05/13 07:02 PM
Joined: Nov 2008 Posts: 833 MN hemidup super stock
hemidup super stock Joined: Nov 2008 Posts: 833 MN	6.1 block Bore 4.090 Callies Comstar forged crank 4.050 Callies Comstar H beam rods 6.125 Diamond forged flat-top pistons 10.85 final compression Apache heads CNC'd by Indy cyl Comp Cams 114 lobe separation .584 intake lift .579 exhaust lift 242 intake and 248 degrees duration at .050 lift Drag Pak Intake Holley 950-cfm Ultra HP carb MSD Hemi-6 ignition TTI Headers 1 7/8 in. primary stepped to 2 in. Milodon pan and pick-up Melling oil pump Jerry Williams.

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: hemidup] #1381842 02/05/13 08:26 PM 02/05/13 08:26 PM
Joined: Jan 2003 Posts: 17,918 Akron, Ohio ProSport I Live Here
ProSport I Live Here Joined: Jan 2003 Posts: 17,918 Akron, Ohio	Is it possible to run a cam with 600+ lift in these 6.1 Hemi's?

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: ProSport] #1381843 02/05/13 09:22 PM 02/05/13 09:22 PM
Joined: Nov 2008 Posts: 833 MN hemidup super stock
hemidup super stock Joined: Nov 2008 Posts: 833 MN	Quote: Is it possible to run a cam with 600+ lift in these 6.1 Hemi's? +.600" lift? Some have done it, I don't recomend it. Jerry Williams.

Re: Need the link to the latest Gen3 Hemi that made 719hp [Re: hemidup] #1381844 02/05/13 09:31 PM 02/05/13 09:31 PM
Joined: Sep 2005 Posts: 1,551 baldwinsville new york A a493demon pro stock
a493demon pro stock A Joined: Sep 2005 Posts: 1,551 baldwinsville new york	this help ?http://monstermopar.com/forum/index.php?topic=3033.0

Page 1 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1