Re: How many teeth on hemi
[Re: Onewickedhemi]
#1369753
01/15/13 02:52 PM
01/15/13 02:52 PM
|
Joined: Jan 2003
Posts: 75,020 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,020
U.S.S.A.
|
Quote:
I am going to buy a flywheel for my 528 hemi. I noticed there is different number of teeth on flywheels. Which one do I need to buy?
Thanks
The flywheel used is determined by the bellhousing , what bellhousing are you using ?
|
|
|
Re: How many teeth on hemi
[Re: topside]
#1369754
01/15/13 03:38 PM
01/15/13 03:38 PM
|
Joined: Dec 2010
Posts: 409 PEI Canada
chromedome426
mopar
|
mopar
Joined: Dec 2010
Posts: 409
PEI Canada
|
Flywheel needs to be matched with proper bell housing and starter. 66-69 Hemi's came with 172 tooth flywheel, 11" clutch, and a special bell housing for that flywheel and used a direct drive starter. 70-71 Hemi's came with 130 tooth flywheel, 10.5" clutch, and an aluminum bell housing that was suitable for that size flywheel and it used the common reduction gear starter. (same bell housing used on 70-7? big blocks) You can now also buy a 143 tooth 8 bolt flywheel for the Hemi that uses the 11" clutch and the 68-69 big block cast iron bell housing and the common reduction gear starter. (Note: This set up may have clearance issues with stock manifolds and the starter.) There is an aftermarket direct drive starter available for this set up that clears the manifold. http://www.robbmcperformance.com/products/starter_home.htmlThe reduction gear starter is the same for manual and automatic transmissions. The different bell housings are made to locate the starter in the correct location for the size of flywheel being used.
|
|
|
Re: How many teeth on hemi
[Re: chromedome426]
#1369755
01/15/13 06:57 PM
01/15/13 06:57 PM
|
Joined: Jan 2003
Posts: 4,285 Ohio
64dodge572
master
|
master
Joined: Jan 2003
Posts: 4,285
Ohio
|
The best setup is the 130 tooth flywheel/bellhousing, and if you use a McLeod clutch package (scalloped pressure plate) you get a 10.9" clutch disc/pressure plate that fits the 10.5" flywheel. Allows you to use a conventional gear reduction starter or one of the mini starters, and makes exhaust clearance a lot easier.
Wayne
Brewers Performance Inc. 4-speed transmission and parts specialists PH 937-947-4416 or 937-698-4259 FAX 937-947-4419 www.brewersperformance.com
|
|
|
Re: How many teeth on hemi
[Re: 64dodge572]
#1369756
01/15/13 08:44 PM
01/15/13 08:44 PM
|
Joined: Mar 2008
Posts: 1,913 central P.A.
HEMIDOG 70
top fuel
|
top fuel
Joined: Mar 2008
Posts: 1,913
central P.A.
|
Quote:
The best setup is the 130 tooth flywheel/bellhousing, and if you use a McLeod clutch package (scalloped pressure plate) you get a 10.9" clutch disc/pressure plate that fits the 10.5" flywheel. Allows you to use a conventional gear reduction starter or one of the mini starters, and makes exhaust clearance a lot easier.
Wayne
Used this setup in my 528 with brewers 10.5 bell it works good.
|
|
|
Re: How many teeth on hemi
[Re: Onewickedhemi]
#1369761
01/16/13 12:59 AM
01/16/13 12:59 AM
|
Joined: Jan 2003
Posts: 75,020 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,020
U.S.S.A.
|
Quote:
I am using the stock exhaust manifolds. Is there a problem with that?
There will be if you get a 143 tooth wheel , get the 130 .
|
|
|
Re: How many teeth on hemi
[Re: Onewickedhemi]
#1369764
01/16/13 04:59 PM
01/16/13 04:59 PM
|
Joined: Jan 2003
Posts: 75,020 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,020
U.S.S.A.
|
Quote:
I will get a 130 tooth, question that I would like to know is what problems will I have if I us a 143 tooth?
Thanks
The starter and the left exhaust manifold may want to share the same space, it was mentioned in a post above.
|
|
|
Re: How many teeth on hemi
[Re: mickm]
#1369766
01/16/13 08:43 PM
01/16/13 08:43 PM
|
Joined: Jan 2003
Posts: 75,020 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,020
U.S.S.A.
|
Quote:
hope this isn't hijacking the post, but i had the 11" setup and went to the 10.5" setup, which i believe in this case is really the 10.95".
i went from the 142 to the 130 tooth flywheel. i have a mini-starter on there now.
am i going to need a different starter?
Headers or manifolds ?
|
|
|
Re: How many teeth on hemi
[Re: JohnRR]
#1369767
01/16/13 09:14 PM
01/16/13 09:14 PM
|
Joined: Jul 2006
Posts: 4,179 California
mickm
master
|
master
Joined: Jul 2006
Posts: 4,179
California
|
Quote:
Quote:
hope this isn't hijacking the post, but i had the 11" setup and went to the 10.5" setup, which i believe in this case is really the 10.95".
i went from the 142 to the 130 tooth flywheel. i have a mini-starter on there now.
am i going to need a different starter?
Headers or manifolds ?
headers.
|
|
|
Re: How many teeth on hemi
[Re: mickm]
#1369768
01/17/13 09:05 AM
01/17/13 09:05 AM
|
Joined: Jan 2003
Posts: 75,020 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,020
U.S.S.A.
|
Quote:
Quote:
Quote:
hope this isn't hijacking the post, but i had the 11" setup and went to the 10.5" setup, which i believe in this case is really the 10.95".
i went from the 142 to the 130 tooth flywheel. i have a mini-starter on there now.
am i going to need a different starter?
Headers or manifolds ?
you shouldn't have an issues , mini and a 130 should work fine . it's manifolds where things get tight.
headers.
|
|
|
Re: How many teeth on hemi
[Re: JohnRR]
#1369769
01/17/13 08:27 PM
01/17/13 08:27 PM
|
Joined: Jul 2006
Posts: 4,179 California
mickm
master
|
master
Joined: Jul 2006
Posts: 4,179
California
|
Quote:
Quote:
Quote:
Quote:
hope this isn't hijacking the post, but i had the 11" setup and went to the 10.5" setup, which i believe in this case is really the 10.95".
i went from the 142 to the 130 tooth flywheel. i have a mini-starter on there now.
am i going to need a different starter?
Headers or manifolds ?
you shouldn't have an issues , mini and a 130 should work fine . it's manifolds where things get tight.
headers.
good to know, one less thing to buy!
thanks!
|
|
|
Re: How many teeth on hemi
[Re: mickm]
#1369770
01/17/13 10:00 PM
01/17/13 10:00 PM
|
Joined: Dec 2004
Posts: 10,554 Rittman Ohio
fourgearsavoy
I Live Here
|
I Live Here
Joined: Dec 2004
Posts: 10,554
Rittman Ohio
|
I run an old Ansen steel bell with a 143 tooth wheel and a Mopar factory V-6 starter with Doug's D-452 2" tube headers with no problems at all If you just need a flywheel I can send you an old Hays steel wheel that can't be machined anymore Just shoot me a PM and we can work out the details Gus
64 Plymouth Savoy 493 Indy EZ's by Nick at Compu-Flow 5-Speed Richmond faceplate Liberty box Dana 60
|
|
|
Re: How many teeth on hemi
[Re: Onewickedhemi]
#1369772
01/18/13 04:18 AM
01/18/13 04:18 AM
|
Joined: Jul 2006
Posts: 4,179 California
mickm
master
|
master
Joined: Jul 2006
Posts: 4,179
California
|
Quote:
Thanks Gus, PM sent.
Fred
fred, you sent the PM to me, not gus. your account doesn't seem to be accepting PM's, may want to look into that!
|
|
|
Re: How many teeth on hemi
[Re: fourgearsavoy]
#1369773
01/18/13 11:15 AM
01/18/13 11:15 AM
|
Joined: Jan 2003
Posts: 75,020 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,020
U.S.S.A.
|
Quote:
I run an old Ansen steel bell with a 143 tooth wheel and a Mopar factory V-6 starter with Doug's D-452 2" tube headers with no problems at all If you just need a flywheel I can send you an old Hays steel wheel that can't be machined anymore Just shoot me a PM and we can work out the details Gus
Gus , when did you buy a HEMI ? He needs an 8 bolt (I assume his crank is 8 bolt) 130 tooth wheel
|
|
|
|
|